Fans
Fans 109E5724H504 17251 24V .58A 172x150x51 17CM inverter case fan
A 172 mm square inverter case fan running on 24 V at 0.58 A with a 51 mm depth
- 17 cm frame fits wide chassis openings
- 24 V DC input matches inverter power rails
- 58 A draw keeps circuit load low
- 51 mm depth clears tight internal spaces
17 cm 24 V inverter case fan
This 172 mm square fan runs on a 24 V supply and draws 0.58 A. The inverter motor design suits industrial chassis or server enclosures that require steady airflow from a DC source. Builders working with 24 V power distribution will find the electrical specification a direct match. It is not for systems limited to 12 V headers or standard desktop headers.
172 x 150 x 51 mm frame with original part number
The housing measures 172 by 150 by 51 mm and carries the manufacturer part number 109E5724H504. No mounting screws, adapters or speed-control cables are included in the package. Installers must provide their own fixings and any PWM or voltage regulation hardware the chassis demands.
Highlights
- 17 cm frame fits wide chassis openings
- 24 V DC input matches inverter power rails
- 58 A draw keeps circuit load low
- 51 mm depth clears tight internal spaces
Specifications
No published specifications for this item yet.
Questions about this item
Will the 172 mm frame or 51 mm depth require any special mounting hardware later?
The 172 mm by 150 mm frame and 51 mm depth match standard 17 cm mounting holes, so no special brackets are needed for replacement.
What limits continuous running at the rated 24 V and 0.58 A?
The motor is rated for 24 V at 0.58 A; sustained operation stays within that envelope as long as airflow is not blocked.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



