We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular industrial cooling fan, 17.2 by 15 by 5.1 cm, black plastic housing with visible blades, wire leads attached

Fanhome

Fanhome 6448TDHHBR 48V 159W 17.2*15*5.1cm fan

SKU CH-7DXD-DQKBR

A 48 V, 159 W replacement fan measuring 17.2 × 15 × 5.1 cm for EBMPAPST 6448 models

  • 48 V supply enables stable industrial operation
  • 159 W rating delivers high airflow performance
  • 2 × 15 × 5.1 cm footprint fits EBMPAPST replacement slots
  • Pre-tested unit ships ready for immediate installation
  • Supplied as single fan for direct swap

48 V 159 W Industrial Fan

The Fanhome 6448TDHHBR is a 48 V DC axial fan rated at 159 W, built to the original EBMPAPST 17.2×15×5.1 cm footprint. It serves technicians replacing a failed unit in rack-mount power supplies, telecom shelves or industrial chassis where that exact frame and voltage are mandated.

Airflow Headroom and Limits

At 159 W the motor delivers the high static pressure the original design specifies, so it clears dense heatsink stacks and restrictive filter panels without stall. The limit appears when the system demands more than the factory curve provides; no higher-wattage variant exists in this frame size, so a redesign would be required for greater flow.

17.2×15×5.1 cm Form Factor

The critical specification is the 17.2×15×5.1 cm housing with its specific mounting hole pattern and wire lead configuration. Builders whose equipment uses a different frame depth, screw spacing or connector pin-out cannot use this fan, even if the voltage and power match.

Highlights

  • 48 V supply enables stable industrial operation
  • 159 W rating delivers high airflow performance
  • 2 × 15 × 5.1 cm footprint fits EBMPAPST replacement slots
  • Pre-tested unit ships ready for immediate installation
  • Supplied as single fan for direct swap

Specifications

No published specifications for this item yet.

Questions about this item

Will the 17.2 x 15 x 5.1 cm dimensions of the 6448TDHHBR fit my existing EBMPAPST mounting points?

The 6448TDHHBR measures 17.2 by 15 by 5.1 cm, matching the original EBMPAPST footprint for direct replacement.

How can I verify the 48 V 159 W fan is running correctly after installation?

Confirm the unit spins smoothly at 48 V and draws approximately 159 W without unusual noise or vibration.

Does the box contain only the 6448TDHHBR fan or are mounting screws and a power cable included?

The package includes one 6448TDHHBR 48 V 159 W fan; mounting hardware and wiring are not supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.