We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black square axial fan sixty by sixty millimetres twenty-five millimetres thick with four mounting holes and wire leads

Fanhome

Fanhome 614NHHR 24VDC 3.0W 60x60x25mm case fan

SKU CH-Q84D-KY8XZ

24 VDC axial case fan measuring 60 mm square by 25 mm thick, rated at 3.0 W for equipment cooling

  • 24 VDC supply matches industrial control panels
  • 0 W draw keeps power budgets low
  • 60 mm square frame fits standard cut-outs
  • 25 mm depth suits slim chassis layouts
  • Original ebmpapst 614NHHR build for equipment-grade reliability

Replacement axial fan for 614NHHR systems

This new Fanhome axial fan matches the 614NHHR form factor at 60 by 60 by 25 mm and runs on 24 VDC at 3.0 W. It is built as a direct drop-in for equipment that specifies the original German ebmpapst unit. The package contains one tested fan ready for installation.

Suits maintainers needing an exact 614NHHR

Technicians repairing or servicing gear that calls for this specific 24 VDC 3.0 W frame will find the correct fit and connector style. Builders who require a different voltage, a higher airflow rating, or a PWM control signal should look at other models because this unit is fixed at the stated specification.

24 VDC 3.0 W power rating decides compatibility

The single figure that determines whether this fan works in your hardware is the 24 VDC 3.0 W rating. Verify that your equipment lists exactly that voltage and power draw before ordering; a mismatch will prevent the fan from operating correctly.

Highlights

  • 24 VDC supply matches industrial control panels
  • 0 W draw keeps power budgets low
  • 60 mm square frame fits standard cut-outs
  • 25 mm depth suits slim chassis layouts
  • Original ebmpapst 614NHHR build for equipment-grade reliability

Specifications

No published specifications for this item yet.

Questions about this item

Does the 614NHHR need a 24 V DC power source to run?

Yes, the fan is rated for 24 V DC and draws 3.0 W, so it must be connected to a 24 V supply.

Will the 60 mm square frame and 25 mm depth fit the same mounting holes as my current 60x60x25 mm fan?

The 60x60x25 mm dimensions match the standard mounting pattern for that size, so existing screw holes should align.

How can I confirm the 614NHHR is spinning correctly after installation?

Apply 24 V DC and verify the blades rotate smoothly; the motor should draw about 3.0 W with no unusual noise.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.