We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black Kevlar D-ring extender, eighteen inches long

Falltech

Falltech G8366LAF D-Ring Extender 18in Kevlar Blk

SKU CH-P16H-7P3W7

Kevlar arc-flash D-ring extender, 18 in length, 425 lb capacity, meets ANSI Z359.11-2021 and OSHA 1926.502

  • ColorBlack
  • Extends dorsal attachment by 18 in for easier reach
  • Kevlar webbing resists heat and flame in arc-flash environments
  • Rated to 425 lb capacity for heavy-duty fall arrest
  • Meets ANSI Z359.11-2021, ANSI Z359.12-2009 and ASTM F886 standards
  • Steel hardware with PVC coating adds corrosion resistance

Arc-Flash D-Ring Extender for Harness Safety

The Falltech G8366LAF is an 18 inch Kevlar D-ring extender designed for arc-flash rated harnesses. It provides a torso connection point for workers exposed to electrical arc hazards. The accessory meets ANSI Z 359.11 -2021, ANSI Z 359.12 -2009, ASTM F886, OSHA 1926.502 and OSHA CFR 1910.66 standards. It is not intended for non-arc-flash fall protection applications.

Sustained Load Performance with Kevlar Webbing

The uncoated Kevlar webbing maintains its rated 425 lb weight capacity under continuous tension during a fall arrest event. Unlike short burst testing, the material resists degradation from prolonged heat exposure inherent to arc-flash incidents. Steel and PVC hardware components retain structural integrity throughout the arrest sequence. Workers who need extended immersion protection or chemical resistance should verify compatibility separately.

Standards Define Practical Use Limits

Compliance with ANSI Z 359.11 -2021 and Z 359.12 -2009 governs the extender's allowable service life and inspection criteria. ASTM F886 certification limits use to arc-flash environments meeting specific incident energy thresholds. OSHA 1926.502 and 1910.66 regulations restrict deployment to authorised fall protection systems. The 18 inch length fixes the connection geometry and cannot be adjusted for different harness configurations.

Highlights

  • Extends dorsal attachment by 18 in for easier reach
  • Kevlar webbing resists heat and flame in arc-flash environments
  • Rated to 425 lb capacity for heavy-duty fall arrest
  • Meets ANSI Z359.11-2021, ANSI Z359.12-2009 and ASTM F886 standards
  • Steel hardware with PVC coating adds corrosion resistance

Specifications

ColorBlack
BrandFALLTECH

Questions about this item

Does the 18 in Kevlar extender add heat or weight when worn all day?

The 18 in Kevlar webbing is uncoated and lightweight; the assembly weighs far less than the 425 lb rated capacity and adds no measurable heat buildup during extended wear.

What harness attachment does the 18 in extender require to function?

It connects to an arc-flash rated harness D-ring using the steel hardware; no additional tools or adapters are needed.

Will the 18 in extender work with a legacy harness that meets the 2009 ANSI Z 359.12 standard?

Yes, the extender is certified to ANSI Z 359.12 -2009 and ANSI Z 359.11 -2021, so it remains compliant with older harnesses carrying the 2009 mark.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.