We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel basket midrange driver with silver cone and M-roll surround, 160 mm diameter

Faital Pro

Faital Pro 6FE200-4 6" 130W 8 Ohm midrange driver

SKU CH-F7C1-3VQ0M

A 6-inch professional midrange driver handling 130 W AES with 95 dB sensitivity and an 8-ohm nominal impedance

  • High output from 95 dB sensitivity
  • 130 W AES power handling for demanding use
  • 37 mm aluminium voice coil on Kapton former
  • Waterproof cone with M-Roll surround
  • Compact 77 mm depth fits tight enclosures

Midrange driver for professional audio

The Faital Pro 6FE200-4 is a 6-inch midrange loudspeaker built for professional audio projects, high-output home systems and car audio installations. Its ferrite magnet and steel basket deliver 130 W AES power handling with 95 dB sensitivity. The aluminium voice coil on a Kapton former operates across a wide frequency range. The M-Roll surround and waterproof cone suit demanding environments.

Fits standard 6-inch baffle cutouts

The driver requires a 144 mm baffle cutout and a 154 mm bolt circle for mounting. Overall diameter is 167.4 mm with a 77 mm mounting depth, leaving space behind the baffle for enclosure tuning. The 8 Ohm nominal impedance matches common crossover designs and amplifier outputs. The steel basket and ferrite ring magnet add 2 kg to the enclosure mass.

Replaces lower-sensitivity midrange units

This unit upgrades from drivers with lower sensitivity or smaller voice coils that cannot sustain 130 W continuous power. The 37 mm coil and 1 T flux density improve output and thermal stability in multi-way systems. Builders who need extended low-frequency response below the stated range or a different impedance should consider other models.

Highlights

  • High output from 95 dB sensitivity
  • 130 W AES power handling for demanding use
  • 37 mm aluminium voice coil on Kapton former
  • Waterproof cone with M-Roll surround
  • Compact 77 mm depth fits tight enclosures

Specifications

No published specifications for this item yet.

Questions about this item

At what AES power handling level does the 6FE200-4 reach its thermal limit under sustained use?

The AES power handling is rated at 130 W, which represents the continuous thermal limit for this 8 Ohm midrange driver.

How much heat and noise should I expect when running this driver at full power all day?

With 95 dB sensitivity at 1 W / 1 m, the 6FE200-4 converts most input into sound rather than heat; the 37 mm aluminium voice coil on a Kapton former and 1 T ferrite motor keep thermal compression low during extended high-output operation.

What amplifier impedance and crossover components must I already have to use this 8 Ohm midrange driver?

You need an amplifier stable at 8 Ohm nominal (6.8 Ohm minimum) and a crossover network that passes the 856 kHz frequency range to the driver.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.