We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black flat ribbon cable with 19/20-pin IDC connectors, 5.9 inch length

Fairywill

Fairywill USB 3.0 Header Extension Cable 19/20 Pin 5.9 inch

SKU CH-C0RE-6RA21

Extends a motherboard USB 3.0 header by 5.9 inches with a 19/20-pin flat ribbon cable for tight spaces

  • Connector TypeLighting to USB C
  • Extends motherboard USB 3.0 header by 5.9 inch for tight cases
  • Flat black ribbon cable resists dust buildup and improves airflow
  • 19/20-pin IDC male to female connector ensures secure internal fit
  • Supports 5Gbps data transfer for reliable high-speed performance
  • Low-profile 15cm design simplifies cable routing in compact builds

Internal USB 3.0 Header Extender

This 20-pin male-to-female ribbon cable extends a motherboard USB 3.0 header by 15 cm. The low-profile flat design fits tight chassis spaces and supports 5 Gbps data rates. It is aimed at system builders who need to route an internal front-panel or accessory connector to a recessed header.

Suits cramped builds with limited header access

Installers working in compact cases or behind large coolers gain the extra reach to seat the connector without strain. Builds that require longer runs or multiple header extensions will need a different cable length or a hub solution.

15 cm low-profile 20-pin extension

The 5.9-inch flat ribbon adds just enough length to clear obstructions while maintaining signal integrity at USB 3.0 speeds. It converts a single header into a more accessible connection point for front-panel USB 3.0 ports.

Highlights

  • Extends motherboard USB 3.0 header by 5.9 inch for tight cases
  • Flat black ribbon cable resists dust buildup and improves airflow
  • 19/20-pin IDC male to female connector ensures secure internal fit
  • Supports 5Gbps data transfer for reliable high-speed performance
  • Low-profile 15cm design simplifies cable routing in compact builds

Specifications

Connector TypeLighting to USB C

Questions about this item

How do I connect the 19/20-pin IDC male plug to the motherboard header without bending pins?

Align the keyed notch on the IDC male connector with the missing pin on the motherboard header, then press straight down until the latch clicks; forcing it at an angle bends the 19 or 20 pins inside the flat ribbon.

Will the flat black ribbon cable need replacement after repeated case openings?

The ribbon is rated for normal build and upgrade cycles; replace it only if the insulation tears or the IDC contacts show corrosion after many insertions.

What throughput limit appears first during long 5 Gbps transfers?

Sustained 5 Gbps traffic is limited by the 15 cm ribbon length and motherboard header signal integrity; cable heating or signal loss will appear before the USB 3.0 controller saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.