EZDIY-FAB EZDPI215-5 PCIe 8-Pin Female to 6+2 Male Extension Cable 30cm White
White 30 cm PCIe 8-pin female to 6+2 male extension with 16 AWG PET-sleeved wires for tidy GPU power routing
- TypeDisplayPort to HDMI Cable
- ColorWhite
- Connector A1x PCIe 6+2pin female
- Connector B1x 12VHPWR PCIe Gen5 female
- Connector DetailHDMI
- Terminal GenderMale to Female
- 16 AWG conductors with PET sleeving for flexible routing
- 30 cm length keeps cable runs tidy inside the case
- PCIe 8-pin female to 6+2-pin male fits 6-pin and 8-pin GPU sockets
- White finish matches light-themed builds
- Weighs only .06 kg to reduce strain on connectors
30 cm PCIe power extension
This 30 cm cable extends a power supply 8-pin PCIe output to a graphics card or other PCIe device using a 6+2 pin male connector. The white PET-sleeved 16 AWG wires balance flexibility and stiffness for tidy routing inside a case. It is suited for builders who need extra reach without adding bulk.
Replaces short stock GPU leads
The extension replaces the short native cables that come with many power supplies when the GPU sits far from the PSU or behind a vertical mount. The jump is worth it when the stock length forces tight bends or visible slack that ruins a clean build aesthetic. It does not add power phases or change voltage delivery.
Fits standard ATX PSU and GPU sockets
The female end plugs into any standard 8-pin PCIe port on the supply while the 6+2 male end mates with 6-pin or 8-pin GPU inputs. The 16 AWG conductors handle typical graphics card loads and the sleeve matches other white EZDIY-FAB kits for a uniform look. Buyers who need a 12VHPWR native connector or longer runs cannot use this cable.
Highlights
- 16 AWG conductors with PET sleeving for flexible routing
- 30 cm length keeps cable runs tidy inside the case
- PCIe 8-pin female to 6+2-pin male fits 6-pin and 8-pin GPU sockets
- White finish matches light-themed builds
- Weighs only .06 kg to reduce strain on connectors
Specifications
| Brand | EZDIY-FAB |
|---|---|
| Model | EZDPI215-5 |
| Type | DisplayPort to HDMI Cable |
| Color | White |
| Connector A | 1x PCIe 6+2pin female |
| Connector B | 1x 12VHPWR PCIe Gen5 female |
| Connector Detail | HDMI |
| Terminal Gender | Male to Female |
| Specifications | EZDPI215-5, HDMI, White, 0.06 kilograms, EZDIY-FAB, US-8 to 6+2 pin-WW |
| Refresh Rate | 11.8 inches |
| Features | HDMI, White, EZDIY-FAB, EZDPI215-5, US-8 to 6+2 pin-WW |
Questions about this item
Will the 16 AWG PET-sleeved 30 cm cable clear my GPU backplate and motherboard 8-pin socket without strain?
The 30 cm length and 16 AWG PET sleeve give enough stiffness to route cleanly behind most backplates while reaching the motherboard 8-pin socket without tension.
Which end plugs into the PSU and which end plugs into the graphics card during installation?
Connect the PCIe 8-pin female end to the power supply 8-pin PCIe output, then plug the 6+2 pin male end into the GPU 6-pin or 8-pin socket.
If I later rebuild with a 12VHPWR graphics card, can this extension stay in the loop?
No, the male end is a PCIe 6+2 pin connector and cannot mate with a 12VHPWR socket, so a new Gen5-native cable would be required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114993BTC
In stock
