MediaPack4All 12.5mm Blu-Ray Case Multi-Three Storing Capacity
- 2.4892 L x 18.2118…
- 1 Year Warranty
$13.99
0.00016485BTC
In stock
EZ Dupe, Inc.
EZ Dupe, Inc. SD Pantera 3.0 1-to-15 SD/MicroSD Duplicator SDC15-SSPX100
Standalone duplicator copies up to 15 SD or MicroSD cards at 100 MB/s per slot with DoD-compliant erase modes
- TypeSD/MicroSD Duplicator
- Target1 to 15
- ControllerAthena Controller
- Buffer Memory128M
- Supported MediaSecure Digital / MicroSD
- Data Transfer Rate6GB/min
- Copy 15 cards simultaneously at 100MB/s per slot
- Four erase modes including DoD 3-pass and 7-pass standards
- Standalone operation needs no PC or software to run
- Asynchronous copy starts as soon as source and targets are inserted
- 16×2 LCD with status lights shows progress at a glance
What the Pantera 3.0 does and who needs it
This standalone duplicator copies one Secure Digital or MicroSD source card to as many as 15 target cards simultaneously at up to 100 MB per second. It is built for IT departments, forensic labs and media houses that must replicate or sanitise flash media quickly without tying up a workstation.
Installation and common pitfalls
The unit plugs into any 115-230 V mains supply and runs independently — no host computer, driver or software install is required. Users sometimes forget that each target slot accepts either an SD or a MicroSD card but only one of the two can be active per slot, so inserting both at once will prevent the copy from starting.
What to verify before ordering
Confirm that your source media are standard Secure Digital or MicroSD cards; the duplicator does not support other form factors such as CFast or USB drives. Ensure you have access to a standard AC outlet and sufficient bench space for the 15-slot tower, because the device is not rack-mountable and ships with no additional mounting hardware.
Highlights
- Copy 15 cards simultaneously at 100MB/s per slot
- Four erase modes including DoD 3-pass and 7-pass standards
- Standalone operation needs no PC or software to run
- Asynchronous copy starts as soon as source and targets are inserted
- 16×2 LCD with status lights shows progress at a glance
Specifications
| Brand | EZ Dupe |
|---|---|
| Model | SD Pantera 3.0 |
| Part Number | SDC15-SSPX100 |
| Type | SD/MicroSD Duplicator |
| Target | 1 to 15 |
| Controller | Athena Controller |
| Buffer Memory | 128M |
| Supported Media | Secure Digital / MicroSD |
| Data Transfer Rate | 6GB/min |
| Data Source ROM | 1 SD Slot for Source Reading |
| Data Destination Burner | 15 SD Slots for SD to SD Copy |
| Display | 16 x 2 LCD |
| Operating Type | Standalone |
| Connector | Secure Digital / MicroSD |
| Panel Color | Black |
| Load Type | Slot |
| Key Features | Duplication |
| Features | Indication Lights |
| Power Supply | AC: 115-230 V, 50/60 Hz |
| Package Contents | see pictures for details |
Questions about this item
How do I confirm the duplicator copied all 15 target cards correctly?
The 16 x 2 LCD shows pass/fail status for each of the 15 destination slots after the copy finishes.
What comes in the box and do I need extra adapters for MicroSD cards?
The unit includes the duplicator and power cable for 115-230 V AC; MicroSD cards fit the dedicated slots directly so no separate adapters are required.
Which erase mode meets the 5220.22-M standard for three passes?
Choose DoD 3-pass erase; it runs three overwrite cycles compliant with the 5220.22-M specification.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
