We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular tower duplicator with eleven SATA drive bays on the front panel

EZ Dupe, Inc.

EZ Dupe, Inc. 1-to-11 SATA duplicator 600MB/s 3.5" 2.5" H11PROHSATB

SKU CH-YF5T-0VP38

Standalone duplicator copies up to 11 SATA 3.5" or 2.5" drives at 600MB/s with four copy modes and seven erase modes including DoD 5220.22 standards

  • Target1 to 11
  • Data Transfer Rate600MB/s

Target 1 to 11

Data Transfer Rate 600MB/s

  • Copies 11 drives simultaneously at 600 MB/s
  • Four copy modes match any cloning requirement
  • Seven erase modes include DoD 5220.22 compliance
  • Handles 3.5" and 2.5" SATA drives without adapters
  • Standalone operation removes host-computer dependency

1-to-11 SATA duplicator for IT teams

This standalone unit copies up to eleven SATA 3.5" or 2.5" drives simultaneously at 600MB/s. No host computer or software is required, keeping sensitive data off the network. Four copy modes handle quick file transfers, full media clones, partitioned areas, or percentage ranges. Seven erase modes include DoD 5220.22-M 3-pass and 7-pass sanitisation.

Upgrades from single-bay or slower duplicators

Teams still copying drives one at a time or at lower throughput will see the jump to eleven concurrent targets at 36GB/min per slot. The step up is worth it when daily volume exceeds what a single bay can finish in a shift, or when compliance demands DoD-grade sanitisation on every drive.

Check drive interface and bay count

Verify every source and target drive uses a SATA interface; other interfaces are not supported. Confirm the eleven target bays match your batch size — larger jobs will need multiple runs. Ensure the master drive capacity does not exceed the target drives when using full-copy or partition modes.

Highlights

  • Copies 11 drives simultaneously at 600 MB/s
  • Four copy modes match any cloning requirement
  • Seven erase modes include DoD 5220.22 compliance
  • Handles 3.5" and 2.5" SATA drives without adapters
  • Standalone operation removes host-computer dependency

Specifications

Target1 to 11
Data Transfer Rate600MB/s

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How many 3.5" or 2.5" SATA drives can the H11PROHSATB accommodate at once?

The duplicator has eleven target slots so you can load one source drive and up to eleven 3.5" or 2.5" SATA drives simultaneously.

What is the correct way to start a copy job on this standalone duplicator?

Insert the source drive into the designated master slot, load target drives into the remaining slots, select the desired copy mode from the front-panel menu, then press Start — skipping the mode selection is the common mistake.

Which erase modes on this unit meet the 5220.22-M standard for sanitisation?

The duplicator offers DoD 3-pass and DoD 7-pass erase modes, both compliant with the 5220.22-M standard, plus Secure Erase and Enhanced SSD Erase for solid-state media.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.