We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular duplicator unit with seven SATA drive slots on the front panel

EZ Dupe, Inc.

EZ Dupe 1-to-7 SATA duplicator 600MB/s 36GB/min H07PROHSATB

SKU CH-6X4W-P8E9B

Copies up to 7 SATA 2.5" or 3.5" drives at 600 MB/s with four copy modes and seven erase modes including DoD 5220.22 standards

  • Target1 to 7
  • Data Transfer Rate600MB/s

Target 1 to 7

Data Transfer Rate 600MB/s

  • Copy 7 drives simultaneously at 600 MB/s per slot
  • 4 copy modes including quick, full, partition and percentage copy
  • 7 erase modes including DoD 3-pass and 7-pass to 5220.22 standard
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation needs no PC or software for secure copying

Duplicator for seven SATA drives

This standalone duplicator copies up to seven SATA 3.5" or 2.5" hard drives or solid state drives at the same time. It reaches 600MB/s per slot, equivalent to 36GB/min, without needing a host computer or software. Four copy modes handle quick file copies, full media clones, partition-only copies and percentage-based range copies.

Suited for high-volume SATA duplication

IT departments, forensic labs and data-centre teams that need to clone or sanitise many SATA drives in parallel will benefit from the seven-target capacity and the range of DoD-compliant erase modes. Buyers who need to duplicate drives with interfaces other than SATA, or who require more than seven target bays, should consider other equipment.

Seven-target SATA capacity decides fit

The single specification that determines whether this unit fits the workflow is the ability to write to seven SATA targets simultaneously at 600MB/s each. If the workload demands fewer or more concurrent copies, or a different drive interface, a different duplicator is required.

Highlights

  • Copy 7 drives simultaneously at 600 MB/s per slot
  • 4 copy modes including quick, full, partition and percentage copy
  • 7 erase modes including DoD 3-pass and 7-pass to 5220.22 standard
  • Works with 2.5" and 3.5" SATA drives without adapters
  • Standalone operation needs no PC or software for secure copying

Specifications

Target1 to 7
Data Transfer Rate600MB/s

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the box with the EZ Dupe 1-to-7 SATA duplicator and do I need to buy anything extra?

The duplicator is a standalone unit that copies up to 7 SATA drives at 600MB/s without a host computer. You only need to supply the source and target 2.5" or 3.5" SATA drives; no adapter or extra cabling is required.

Which capacity or version of the H07PROHSATB should I choose for my workload?

This model is a single 1-to-7 target configuration rated at 36GB/min per slot. There are no alternate capacities or versions listed, so the only choice is whether seven simultaneous targets meet your volume needs.

What does the 600MB/s headline speed mean when the duplicator is running a real copy job?

Each of the seven target bays can sustain up to 600MB/s (36GB/min) during a copy operation, so all seven drives write at that rate simultaneously when using Quick Copy, Whole Media, All Partitioned or Percentage Copy modes.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.