We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Portable hard-drive duplicator in a rugged case, three SATA bays for 2.5 and 3.5 drives, LCD front panel, copies at up to 600 MB/s

EZ Dupe, Inc.

EZ Dupe HD Pal Pro Duplicator 1-3 Target 600MB/s SATA

SKU CH-B81P-MQDNX

Standalone duplicator copies one SATA HDD or SSD to three targets at 600 MB/s with write-blocking, SMART analysis and secure erase modes

  • Target1 to 3
  • Data Transfer Rate600MB/s
  • Duplicates up to three drives simultaneously at 600 MB/s per channel
  • Bit-for-bit raw-stream copy preserves every sector of the source drive
  • Hardware write-blocker prevents any modification to the original drive during access
  • Four copy modes plus six erase modes including secure and enhanced erase
  • Supports 2.5" and 3.5" SATA HDDs and SSDs in a portable kit

Standalone SATA duplicator for IT labs

The EZ Dupe HD Pal Pro is a self-contained unit that clones 2.5" or 3.5" SATA hard drives and SSDs without a host computer. It accepts one source and up to three targets simultaneously, making it suited for forensic imaging, backup workflows and bulk deployment tasks where write-blocked access is required.

SATA throughput caps real-world speed

Each channel tops out at 600 MB/s, so the source drive and every target must sustain that rate to hit the quoted 36 GB/min. Older SATA revisions, slower mechanical drives or thermal throttling on SSDs will reduce actual throughput below the interface ceiling, and the three targets share the same aggregate bandwidth limit.

Button-driven operation with write-block safety

Insert drives, select one of four copy modes or six erase modes, and press start; no software installation is needed. The hardware write blocker prevents any modification to the source during disk-to-disk or disk-to-file jobs. The only common failure points are mismatched drive capacities or faulty SATA connectors that halt a session mid-copy.

Highlights

  • Duplicates up to three drives simultaneously at 600 MB/s per channel
  • Bit-for-bit raw-stream copy preserves every sector of the source drive
  • Hardware write-blocker prevents any modification to the original drive during access
  • Four copy modes plus six erase modes including secure and enhanced erase
  • Supports 2.5" and 3.5" SATA HDDs and SSDs in a portable kit

Specifications

Target1 to 3
Data Transfer Rate600MB/s

Questions about this item

Should I choose the 1-to-3 target model or a single-target unit for my lab?

The 1-to-3 target model lets you duplicate one source drive to three SATA HDDs or SSDs simultaneously at up to 600MB/s per channel. A single-target unit would only handle one destination at a time.

What does the 600MB/s transfer rate mean when cloning a 2.5" SSD?

Each target channel can sustain up to 600MB/s, so a 2.5" SATA SSD clones at that speed. The raw bit-stream copy includes every sector, and the source remains write-blocked during the operation.

Does the SATA interface limit the duplicator to 3.5" drives only?

No. The duplicator supports both 2.5" and 3.5" SATA hard drives and SSDs. The SATA connection handles data and power for either form factor across the three target ports.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.