EZ-Bridge
EZ-Bridge EZBR-0214+ 250 mW 2.4 GHz 100 Mbps access point
High-power 2.4 GHz outdoor wireless bridge delivering up to 100 Mbps throughput over distances up to three miles with automatic secure linking
- 250 mW output drives links up to 3 miles
- 100 Mbps real-world throughput for video and data
- 11g/n compliance ensures broad device compatibility
- WPA2 encryption with MAC authentication secures the bridge
- Plug-and-play setup auto-discovers peer units
Outdoor wireless bridge system
The EZBR-0214+ is a high-power 2.4 GHz wireless bridge kit rated at 250 mW and compliant with 802.11g and n standards. It delivers real-world throughput up to 100 Mbps and can link two networks up to three miles apart with clear line of sight. The system supports multiple MAC addresses and DHCP passthrough across the wireless link. Multiple units can be joined in a mesh to interconnect more than two sites.
Installers needing simple building-to-building links
This product suits installers who need a plug-and-play outdoor link for internet sharing, remote video surveillance or multi-building network access. It is not for buyers who require licensed-band operation, higher throughput than 100 Mbps or 5 GHz spectrum use. It also does not suit deployments where clear line of sight cannot be achieved between the two endpoints.
Plug-and-play setup with automatic peer discovery
Installation consists of mounting the antennas and connecting the supplied power supplies; the units automatically find each other and establish a secure link. Security defaults include password verification, MAC authentication, SSID suppression and WPA2 encryption. Misalignment of the directional antennas is the most common cause of reduced range or unstable throughput.
Highlights
- 250 mW output drives links up to 3 miles
- 100 Mbps real-world throughput for video and data
- 11g/n compliance ensures broad device compatibility
- WPA2 encryption with MAC authentication secures the bridge
- Plug-and-play setup auto-discovers peer units
Specifications
| Brand | e-zy.net |
|---|---|
| Series | EZ-BRIDGE |
| Model | EZBR-0214+ |
Questions about this item
What type of power supply does the EZBR-0214+ require to operate?
The unit ships with its own power supply; plug it in after installing the antennas and the bridge will automatically link with its peer.
Will the 2.4 GHz bridge interfere with my existing 802.11g or n Wi-Fi equipment?
It complies with the 802.11g and n standards, so it interoperates with legacy gear on the same band without conflict.
How can I verify the link is delivering the rated 100 Mbps throughput after installation?
Run a local throughput test between devices on each side of the bridge; real-world speeds up to 100 Mbps confirm the link is performing as specified.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



