Eyemax
Eyemax 16CH AC 24V 25A Non-Fused Breaker Power Distributor
Distributes AC 24V power across 16 channels with a 25A total capacity, featuring auto-resettable PTC protection in a wall-mount metal enclosure
- TypePower Supply
- Powers 16 cameras from one box
- Delivers AC 24V at up to 25A total
- Auto-resetting PTC protection on every channel
- Accepts standard 115VAC 60Hz mains input
- Wall-mount metal enclosure measures 10.08 x 8.27 x 3.74 inches
16-Channel AC 24V Power Distributor
This unit distributes 24 V AC power to up to sixteen surveillance cameras from a single 115 V AC 60 Hz mains feed. A total output rating of 25 A is shared across all channels. Positive Temperature Coefficient devices provide auto-resetting over-current protection on every output. The steel enclosure is designed for wall mounting.
Installers running multi-camera CCTV systems
The sixteen outputs suit installations that need one central power point for many cameras. Sites requiring fused rather than PTC protection should consider a different distribution method. Builders needing more than twenty-five amps of combined current must look at higher-capacity units. Projects using DC-powered cameras cannot use this AC-only distributor.
25 A total output current
The combined 25 A limit determines how many cameras can run simultaneously. Each camera’s draw must be added together to stay within this figure. Exceeding the rating will trip the PTC devices and cut power to the affected channels. Calculate the aggregate load before installation to confirm the distributor meets the system’s needs.
Highlights
- Powers 16 cameras from one box
- Delivers AC 24V at up to 25A total
- Auto-resetting PTC protection on every channel
- Accepts standard 115VAC 60Hz mains input
- Wall-mount metal enclosure measures 10.08 x 8.27 x 3.74 inches
Specifications
| Type | Power Supply |
|---|
Questions about this item
How many cameras can the 16-channel AC 24V output support before the 25A total current limit is reached?
The unit provides 16 ports with a combined 25A at AC 24V; each connected camera draws from that shared 25A budget, so the practical camera count depends on the per-camera current draw.
What wall space and mounting hardware does the 10.08" x 8.27" x 3.74" metal box require?
The steel enclosure measures 10.08 inches wide by 8.27 inches high by 3.74 inches deep and includes pre-drilled mounting holes for direct wall attachment using screws or bolts.
How is the 115VAC 60Hz mains supply wired into the distributor, and what common mistake trips the PTC protection?
Connect the 115VAC 60Hz feed to the designated input terminals inside the box; the auto-resettable PTC will trip if the combined load on the 16 output ports exceeds 25A, so verify each camera's current rating before powering up.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



