Extreme Networks
Extreme Networks Silhouette Ceiling Mounting Bracket 14 or 18
$23.99
0.0002857BTC
In stock
Extreme Networks
Extreme Networks AP510I-1-FCC access point
Dual-band indoor access point with 2.4 GHz and 5 GHz radios, 1 GbE and 5 GbE PoE ports, console, USB 3.0, and FCC-domain regulatory approval
- Frequency Band2.4 GHz / 5 GHz
- Interface1 x 1000Base-T (PoE) - RJ-45, 1 x 5GBase-T (PoE) - RJ-45, 1
- FeaturesDomain US puerto rico colombia Traditional dual radio 2.4 GH
- Dual-band 2.4 GHz and 5 GHz coverage for flexible client support
- Dual 5 GHz radio option increases capacity in dense environments
- 5GBase-T PoE uplink delivers multi-gigabit backhaul without new cabling
- USB 3.0 Type-A port enables external sensor or storage expansion
- Console RJ-45 provides direct out-of-band management access
Indoor dual-band access point
The Extreme Networks AP510I-1-FCC is a new indoor wireless access point built for commercial deployments. It operates on 2.4 GHz and 5 GHz bands with configurable dual-radio modes including traditional dual-band, sensor configurations and dual 5 GHz operation. The unit supports 802.11az/ac/abgn standards and includes a USB 3.0 Type A port for added flexibility. PoE-powered Ethernet ports simplify installation in ceiling or wall locations.
Suited for managed Wi-Fi rollouts
This model fits organisations that need flexible radio modes and multi-gigabit wired backhaul in a single indoor device. It is not for buyers who require outdoor-rated enclosures, external antenna connectors or support for regulatory domains beyond the US, Puerto Rico and Colombia listed in the features. Teams without PoE switching or multi-gigabit uplink capacity should evaluate whether the 5GBase-T port can be used in their current infrastructure.
Dual 5GBase-T and 1000Base-T PoE interfaces
The defining specification is the combination of one 1000Base-T PoE port and one 5GBase-T PoE port on RJ-45 connectors. This gives a wired uplink up to 5 Gbps while powering the access point over the same cable, a requirement for high-density 802.11az/ac/abgn environments where 1 Gbps would become a bottleneck.
Highlights
- Dual-band 2.4 GHz and 5 GHz coverage for flexible client support
- Dual 5 GHz radio option increases capacity in dense environments
- 5GBase-T PoE uplink delivers multi-gigabit backhaul without new cabling
- USB 3.0 Type-A port enables external sensor or storage expansion
- Console RJ-45 provides direct out-of-band management access
Specifications
| Brand | Extreme Networks |
|---|---|
| Series | ExtremeMobility AP510i |
| Model | AP510I-1-FCC |
| Frequency Band | 2.4 GHz / 5 GHz |
| Interface | 1 x 1000Base-T (PoE) - RJ-45, 1 x 5GBase-T (PoE) - RJ-45, 1 x console - RJ-45, 1 x USB 3.0 - Type A |
| Features | Domain US puerto rico colombia Traditional dual radio 2.4 GHz and 5 GHz radio mode 2.4 GHz and 5 GHz sensor radio 1 and 5 GHz on radio 2 mode Dual 5 GHz radio Dual Radio 802.11az/ac/abgn |
| Shipping weight | 1.72 kg |
| Package size | 279 × 279 × 76 mm |
Questions about this item
What ceiling or wall mount spacing does the AP510I-1-FCC require?
The unit fits standard T-bar ceiling grids and wall brackets; allow at least 28 cm clearance around the 5GBase-T and 1000Base-T ports for cable bend radius.
Which PoE port should I use first when powering up the AP510I-1-FCC?
Connect the 5GBase-T RJ-45 port to a PoE+ injector or switch; the 1000Base-T port is secondary and will not negotiate full power if used alone.
When should the USB 3.0 Type-A port be used on the AP510I-1-FCC?
Insert a USB 3.0 drive only for local packet capture or firmware staging; it is not needed for normal cloud-managed operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
RUCKUS WIRELESS
RUCKUS WIRELESS 10G-SFPP-LR-S SFP+ transceiver module 10 GigE
$233.99
0.00278666BTC
In stock
