Optimus Enterprise Inc
Optimus Enterprise Inc U32030 3.5 Gallon Warm Mist Humidifier
- Humidifier
- Low maintenance No…
$65.99
0.00078132BTC
In stock
Extreme Networks
Extreme Networks 17115 X870 Fan Module Front-to-Back Airflow
Cooling fan module with front-to-back airflow for Extreme Networks X870 series switches
- Front-to-back airflow directs heat away from switch components
- Designed specifically for Extreme Networks X870 series switches
- Single fan module replaces or adds cooling capacity
- New condition ensures reliable operation from first install
- Manufacturer part number 17115 confirms exact compatibility
Purpose-built cooling for X870 switches
This Extreme Networks 17115 fan module provides front-to-back airflow designed specifically for the X870 series switch. It is a direct replacement part for network engineers maintaining existing Extreme Networks infrastructure. Operators needing side-to-side cooling or modules for different switch families cannot use this unit.
Front-to-back airflow orientation
The single deciding specification is the front-to-back airflow direction, which must match the chassis ventilation design of the X870 switch. Installing a module with the opposite airflow pattern would disrupt the intended thermal path and risk equipment overheating. Verify the chassis label before ordering.
Hot-swap thermal management
The module supports hot-swappable insertion so cooling capacity is maintained during replacement without powering down the switch. Normal operation draws power directly from the chassis backplane and runs at speeds calibrated for the X870 thermal profile. Acoustic output scales with internal temperature sensors rather than fixed RPM curves.
Highlights
- Front-to-back airflow directs heat away from switch components
- Designed specifically for Extreme Networks X870 series switches
- Single fan module replaces or adds cooling capacity
- New condition ensures reliable operation from first install
- Manufacturer part number 17115 confirms exact compatibility
Specifications
| Brand | Extreme Networks |
|---|---|
| Shipping weight | 0.23 kg |
| Package size | 185 × 80 × 70 mm |
Questions about this item
How does front-to-back airflow affect cooling inside an X870 switch?
Front-to-back airflow pulls cool air from the front of the rack and exhausts it at the rear, matching the standard data-centre hot-aisle/cold-aisle layout used by the X870 series.
What slot standard does the 17115 fan module use to connect to the switch?
The module plugs directly into the dedicated fan tray bay on the X870 chassis; no separate power or data cables are required.
What physical space does the module need to fit in an X870 chassis?
It occupies a single fan tray slot in the X870 switch, designed for tool-less insertion and removal during maintenance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
