We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gold three-way coaxial splitter with sealed F-ports

Extreme Broadband Engineering

Extreme Broadband Engineering BDS1103VFB 3-Way Coax Splitter

SKU CH-TBN7-M965W

A 3-way coaxial signal splitter with sealed F-ports tested to 15 psi and SMD circuitry

  • ColorGold
  • Weight0.22
  • Balanced 3-way signal split for reliable distribution
  • 4-sided Circumference Premium Contact gives 8 coaxial contact areas
  • Sealed F-ports pressure tested to 15 psi block water ingress
  • True Flex housing allows horizontal, vertical or snap-in mounting
  • Zinc die-cast housing with fully soldered back ensures electrical performance

Extreme Broadband Engineering 3-Way Coax Splitter

This Extreme Broadband Engineering BDS1103VFB splitter divides a single coaxial signal into three balanced outputs for professional video and broadband distribution. The zinc die-cast housing with fully soldered back construction delivers reliable electrical performance across varied environments and installation conditions.

Installers needing flexible mounting

Technicians who require a splitter that mounts horizontally, vertically, or snaps into an Infinity Premise Enclosure without screws will benefit from the True Flex housing design. Buyers who need more than three output ports or a different frequency range should look at alternative distribution devices.

Three balanced outputs with 15 psi sealed ports

The three F-ports use a 4-sided coaxial seizure mechanism providing eight contact areas for consistent signal quality across all outputs. Each port is pressure tested to 15 psi to prevent water ingress in indoor or outdoor installations. The .22 lb unit uses SMD technology for extended product life in demanding deployments.

Highlights

  • Balanced 3-way signal split for reliable distribution
  • 4-sided Circumference Premium Contact gives 8 coaxial contact areas
  • Sealed F-ports pressure tested to 15 psi block water ingress
  • True Flex housing allows horizontal, vertical or snap-in mounting
  • Zinc die-cast housing with fully soldered back ensures electrical performance

Specifications

BrandExtreme
Part NumberBDS1103VFB
ColorGold
Weight0.22

Questions about this item

What type of coaxial cable and F-connectors do I need to connect to the BDS1103VFB splitter ports?

The splitter uses standard F-ports, so you need coaxial cables fitted with F-type connectors that screw onto each port for a secure connection.

Will the sealed F-ports rated to 15 psi work reliably with my existing outdoor coaxial cable runs?

Yes, the sealed F-ports are pressure tested to 15 psi and designed to prevent water ingress, making them suitable for outdoor installations alongside existing cables.

How can I verify the BDS1103VFB is passing signal correctly to all three outputs after installation?

Connect a signal meter or modem to each output port in turn; each should show a clean signal level consistent with the splitter's balanced design across all three legs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.