Extract-All
Extract-All 987-DCA1 Source-Capture Air Cleaner 350 cfm air treatment
Source-capture air cleaner moves 350 cfm to remove airborne contaminants at the source
- ColorBlack/White
- Source-capture design removes contaminants at the source
- 350 cfm airflow treats large volumes of air quickly
- 987-DCA1 model built for industrial air treatment
- Black and white finish fits professional workspaces
- First listed by manufacturer in 2025
Source-Capture Air Cleaner 350 cfm
The Extract-All 987-DCA1 is a source-capture air cleaner rated at 350 cfm for air treatment applications. It is intended for workshops or industrial spaces that need to remove airborne contaminants directly at the point of generation. The unit ships in a black and white finish and is supplied in new condition.
Practical airflow limits of 350 cfm
A 350 cfm rating defines the volume of air the unit can process, which sets a hard limit on the size of the work envelope it can effectively serve. Capture efficiency drops rapidly as the distance between the source and the hood increases, so the system is constrained to close-proximity extraction. Duct runs, bends, and filters add static pressure that reduces the actual flow below the rated figure.
Installation notes and common issues
The unit is designed for stationary mounting with a ducted hood positioned near the contamination source. Installers must ensure the fan can overcome the total static pressure of the planned duct layout, otherwise airflow will fall short of 350 cfm. A frequent problem is placing the capture hood too far from the work point, which lets contaminants escape into the general room air.
Highlights
- Source-capture design removes contaminants at the source
- 350 cfm airflow treats large volumes of air quickly
- 987-DCA1 model built for industrial air treatment
- Black and white finish fits professional workspaces
- First listed by manufacturer in 2025
Specifications
| Brand | EXTRACT-ALL |
|---|---|
| Color | Black/White |
Questions about this item
Should I choose the 350 cfm version for a small welding booth?
The 350 cfm rating suits small enclosures or single-station capture where the hood sits close to the fume source.
What does 350 cfm actually deliver at the hood?
It moves 350 cubic feet of air per minute through the capture hood, pulling weld fume or dust into the filter before it spreads.
How does the 987-DCA1 connect to ducting?
The unit accepts standard round duct on its inlet collar so you can run a hose directly to the capture hood.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
