We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black low-profile steel TV wall mount with tilt brackets and horizontal sliding rails, shown flat against a wall

Explus-C

Explus-C MLT14-B1 Low Profile Tilt TV Wall Mount 37-80

SKU CH-VNA4-NXSYZ

Low-profile tilt wall mount holds 37–80" TVs 1.9" from the wall, offers 10° tilt and post-install lateral shift, supports VESA 100×100 to 600×400, and is UL-listed

  • Mount StyleWall Mount
  • Fits screens 37 to 80 inches with VESA 100 x 100 to 600 x 400
  • 10 degree tilt removes glare and allows post-install side-to-side shift
  • Low profile holds TV 1.9 inches from wall for flush look
  • UL listed steel construction certified for safety
  • Pre-assembled with hardware for three step DIY install

Low-profile tilt mount for 37–80 inch displays

This wall bracket fits flat-panel screens from 37 to 80 inches and supports VESA patterns between 100 x 100 and 600 x 400. It holds the display only 1.9 inches from the wall for a clean, flush appearance. The unit is UL-listed and constructed from heavy-gauge steel.

10-degree tilt reduces glare

A 10-degree tilt range lets you angle the screen downward to cut reflections from windows or overhead lights. The tilt mechanism operates without tools once the mount is secured. Lateral slide adjustment allows the TV to be centred even when wall studs are off-centre.

Pre-assembled with full hardware kit

The bracket arrives pre-assembled and includes every screw, spacer and anchor needed for wood-stud or concrete installation. A built-in bubble level helps achieve a straight mount on the first try. Safety locking tabs secure the display to the wall plate after positioning.

Highlights

  • Fits screens 37 to 80 inches with VESA 100 x 100 to 600 x 400
  • 10 degree tilt removes glare and allows post-install side-to-side shift
  • Low profile holds TV 1.9 inches from wall for flush look
  • UL listed steel construction certified for safety
  • Pre-assembled with hardware for three step DIY install

Specifications

Mount StyleWall Mount

Questions about this item

How do I install the Explus-C MLT14-B1 on wood studs and what step causes the most trouble?

Mount the wall plate to studs using the supplied lag bolts, then hang the pre-assembled TV brackets onto the plate. The step people get wrong is skipping the post-install level check; the bracket slides side-to-side, so you must re-level after tightening the lag bolts.

What maintenance or replacement will this mount need over time?

No scheduled maintenance is required. The steel frame and UL-listed hardware are rated for the life of the installation; only the tilt tension screw may need occasional re-tightening if the TV is adjusted frequently.

What limit appears first during sustained use — weight, tilt range, or profile depth?

The 10-degree tilt range is the first limit reached; the low 1.9-inch profile and VESA 100x100 to 600x400 compatibility remain constant regardless of how long the mount is in place.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.