We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal tilt TV wall bracket with wide mounting plate and adjustable arms

Explus-C

Explus-C MD2868-LK Tilt TV Wall Mount 37-70in 132lbs

SKU CH-E685-TZ2WQ

Tilts up to 8° to cut glare and fits 37–70 in screens up to 132 lbs with VESA 200×100 to 600×400 on 16, 18 or 24 in studs

  • Mount StyleWall Mount
  • Fits 37 to 70 inch screens with VESA 200x100 to 600x400
  • Holds up to 132 lbs for heavy flat or curved TVs
  • Tilts up to 8 degrees to cut glare and ease neck strain
  • 5 inch low profile keeps the TV close to the wall
  • 24 inch wall plate spans 16, 18 and 24 inch stud spacing

Universal Fit for 37-70 Inch Screens

This tilt TV wall mount supports most flat or curved televisions from 37 to 70 inches weighing up to 132lbs. It covers VESA patterns from 200x100mm to 600x400mm and fits wood studs spaced 16, 18 or 24 inches apart. Buyers with screens larger than 70 inches or heavier than 132lbs need a different bracket.

Installation on Wood Studs

The 24-inch wide wall plate spans 16, 18 and 24-inch stud centres, so alignment is straightforward on standard framing. All major mounting hardware is included for the TV side. Installers must verify stud locations and use appropriate lag bolts; the kit does not supply hardware for concrete, brick or metal stud walls.

Sustained Load and Tilt Behaviour

The UL-listed construction holds the rated 132lbs continuously with a low 1.5-inch profile when locked at zero degrees. Tilting up to 8 degrees forward reduces glare and viewing strain without changing the wall distance. The fixed tilt angle does not allow articulation or swivel, so cable routing behind the screen remains static after mounting.

Highlights

  • Fits 37 to 70 inch screens with VESA 200x100 to 600x400
  • Holds up to 132 lbs for heavy flat or curved TVs
  • Tilts up to 8 degrees to cut glare and ease neck strain
  • 5 inch low profile keeps the TV close to the wall
  • 24 inch wall plate spans 16, 18 and 24 inch stud spacing

Specifications

Mount StyleWall Mount

Questions about this item

How do I verify the 8-degree tilt is holding after mounting my 65-inch TV?

Set the tilt to your chosen angle, tighten the locking bolts fully, then gently press the top and bottom edges of the screen — it should not move. A level on the lower frame confirms the set angle.

Which hardware is included and what must I supply for a 24-inch stud wall?

The kit provides multi-size TV bolts, spacers and washers for VESA 200x100 to 600x400, plus lag bolts and concrete anchors for 16, 18 and 24-inch wood studs. You need a drill, stud finder and level.

Should I choose the MD2868-LK tilt model or the MD2163-K flush version for a 55-inch OLED?

Pick MD2868-LK if you want up to 8 degrees of tilt to cut glare; pick MD2163-K if you prefer a fixed 1.5-inch low profile with no tilt adjustment. Both support 55-inch VESA patterns up to 600x400 and 132 lbs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.