We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel articulating TV wall mount with dual arms and joint bearings, foam pads on wall plate

Explus-C

Explus-C Full Motion TV Mount 37-82'' 100 lbs VESA 600x400mm

SKU CH-91R1-QQW1M

Full-motion wall bracket holds 37-82 in. TVs up to 100 lbs with VESA 600x400 mm, ball-bearing articulation for smooth OLED-safe movement, 5° up/13° down tilt, 45° swivel, 16.3 in.

  • Mount StyleWall Mount
  • Fits screens 37 to 82 inches with VESA patterns 150x100 to 600x400 mm
  • Holds up to 100 lbs on 16, 18 or 24 inch wood studs, concrete or brick
  • Joint-bearing articulating arm gives ultra-smooth swivel and extension for fragile OLED and QLED panels
  • Tilts up 5 degrees, down 13 degrees and swivels 45 degrees left or right for precise positioning
  • Extends 16.3 inches from the wall and retracts to 2.4 inches for space-saving storage

Full Motion Mount for 37-82 Inch TVs

This articulating wall mount supports flat or curved televisions from 37 to 82 inches weighing up to 100 lbs. It fits VESA patterns ranging from 150x100 mm up to 600x400 mm and installs on 16, 18, or 24 inch wood studs as well as concrete and brick walls. Buyers whose screens fall outside this size or weight range will need a different mounting solution.

Smooth Articulating Movement

The joint-bearing arm design delivers smooth extension and swivel action that reduces stress on fragile ultra-thin OLED and QLED panels. Foam pads on the wall plate add a cushion effect during adjustments. The mount tilts five degrees up and thirteen degrees down while swivelling forty-five degrees left or right for flexible positioning.

16.3 Inch Extension with Dual Arm Strength

The bracket extends 16.3 inches from the wall and retracts to 2.4 inches for a low-profile appearance when not in use. A solid cold-formed steel construction with dual six-arm architecture holds the television steady throughout the full range of motion. No cable-management accessories or installation templates are mentioned in the supplied data.

Highlights

  • Fits screens 37 to 82 inches with VESA patterns 150x100 to 600x400 mm
  • Holds up to 100 lbs on 16, 18 or 24 inch wood studs, concrete or brick
  • Joint-bearing articulating arm gives ultra-smooth swivel and extension for fragile OLED and QLED panels
  • Tilts up 5 degrees, down 13 degrees and swivels 45 degrees left or right for precise positioning
  • Extends 16.3 inches from the wall and retracts to 2.4 inches for space-saving storage

Specifications

Mount StyleWall Mount

Questions about this item

How do I mount this bracket on 16" wood studs and what step is often missed?

Drill pilot holes into the centre of two studs spaced 16" apart, use the supplied lag bolts, and verify the TV's VESA pattern falls between 150x100 mm and 600x400 mm before tightening the arms — skipping the VESA check is the common error

Which parts of this mount may need attention after extended use?

The ball-bearing joints and the six pivot arms carry the full 100 lbs load; periodic inspection for play and a light lithium grease application on the bearings will keep the swivel and extension smooth

What movement limit appears first when the TV is pushed to full 16.3" extension daily?

The 16.3" extension reach is the hard stop; beyond that the dual-arm structure cannot maintain the 100 lbs rating, so the mount retracts to 2.4" for storage

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.