Explus-C
Explus-C 8K@60Hz 4K@120Hz DP KVM Switch 2 Monitors 2 Computers USB3.0
A dual-monitor DisplayPort KVM switch lets two computers share two displays and four USB 3.0 devices with 8K at 60 Hz and 4K at 120 Hz support
- TypeKVM Switch
- Share two monitors and four USB devices between two computers
- Up to 8K at 60 Hz and 4K at 120 Hz with no signal loss
- Extended mode expands workspace across both screens
- Copy mode duplicates the main screen for presentations
- Front button and wired remote give instant PC switching
Dual-Display KVM for Two Computers
The Explus-C DisplayPort KVM switch lets two computers or laptops share two monitors and four USB devices. It supports video resolutions up to 8K at 60Hz and 4K at 120Hz, with backward compatibility for 2K at 144Hz and 1080P signals. Both extended and copy display modes are available for multitasking or presentation needs. All cables should be no longer than 1.5 metres.
Suited for Dual-Display Workstations
This switch suits users who need to control two DisplayPort-equipped systems with a single keyboard, mouse and dual-monitor setup. It requires each computer to have two DisplayPort outputs and each monitor to have one DisplayPort input. Buyers whose systems lack dual DisplayPort outputs or who need to share more than two computers should consider a different solution.
Simple Button Switching
An indicator light shows the active channel and switching is performed with a push button on the unit. A separate wired remote button is also included for convenient placement. The only common installation issue is connecting systems or monitors that do not have the required DisplayPort ports, which prevents the switch from functioning.
Highlights
- Share two monitors and four USB devices between two computers
- Up to 8K at 60 Hz and 4K at 120 Hz with no signal loss
- Extended mode expands workspace across both screens
- Copy mode duplicates the main screen for presentations
- Front button and wired remote give instant PC switching
Specifications
| Type | KVM Switch |
|---|
Questions about this item
My PCs only have one DisplayPort output each — can I still run two monitors through this KVM?
The unit requires each computer to provide two DisplayPort outputs and each monitor to have one DisplayPort input, so a single-output PC cannot drive both screens.
I plan to keep my older 1080p monitors — will they work at their native resolution through the switch?
Yes, the switch is backward compatible with 1080p signals and will pass them without degradation or added delay.
After connecting everything, how can I confirm the switch is passing an 8K 60 Hz signal correctly?
Check the front-panel indicator to see which channel is active, then verify in your OS display settings that the resolution reads 8K at 60 Hz.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



