Explus-C
Explus-C 2-Port 8K@60Hz KVM Switch with 3 USB 3.0 Hubs
Lets two computers share one monitor, keyboard, mouse and three USB 3.0 devices at up to 8K 60 Hz
- TypeKVM Switch
- Control two computers with one monitor, keyboard and mouse via button or wired remote
- Share keyboard, mouse, printer and other peripherals through three USB 3.0 ports
- Drive an 8K display at 60 Hz for ultra-high-definition visuals
- Backward compatible with 8K at 30 Hz and 4K at 144 Hz or 120 Hz
- Works with Windows, Linux and Mac systems plus consoles such as PS4
Two-computer KVM switch
This 2-port KVM switch lets a single monitor, keyboard and mouse control two computers. It is aimed at users who need to alternate between a desktop and a laptop, or between a work PC and a gaming console, without re-plugging cables. The device supports Windows, Linux and macOS systems.
Three USB 3.0 ports and two switching methods
Three USB 3.0 ports provide shared access to keyboards, mice, printers, scanners and flash drives. The switch can be operated by a front-panel button or the included wired desktop remote, so the unit itself can sit out of sight while the remote stays within reach.
8K60 HDMI 2.1 bandwidth ceiling
The HDMI 2.1 link tops out at 8K resolution at 60 Hz, with backward compatibility for 8K at 30 Hz and 4K at 144 Hz or 120 Hz. High-quality HDMI 2.1 cables are required to reach those rates. Hotkey switching is not supported, so every changeover uses the button or remote.
Highlights
- Control two computers with one monitor, keyboard and mouse via button or wired remote
- Share keyboard, mouse, printer and other peripherals through three USB 3.0 ports
- Drive an 8K display at 60 Hz for ultra-high-definition visuals
- Backward compatible with 8K at 30 Hz and 4K at 144 Hz or 120 Hz
- Works with Windows, Linux and Mac systems plus consoles such as PS4
Specifications
| Type | KVM Switch |
|---|
Questions about this item
What maximum resolution and refresh rate does the HDMI 2.1 interface on this KVM switch support in practice?
The HDMI 2.1 interface supports up to 8K at 60 Hz, and is backward compatible with 8K at 30 Hz, 4K at 144 Hz and 4K at 120 Hz when using high-quality HDMI 2.1 cables.
What physical connections are required on each computer and the monitor for this 2-port KVM to fit?
Each computer needs an HDMI output and a USB 3.0 port for the KVM cables, while the shared monitor requires an HDMI input; the front panel provides three USB 3.0 ports for peripherals.
How is this KVM switch installed, and which step do users often get wrong?
Connect the two HDMI and USB cables to each computer, plug the monitor and peripherals into the switch, power it on, then press the front button or remote to change inputs — note that hotkey switching is not supported.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



