We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 1U rack-mount switch with 48 copper ports and four SFP cages

EVESKY

EVESKY WS-C3650-48PD-E network switch 48 port PoE 2x10G uplink

SKU CH-3304-V3XVR

A 1U rack-mountable switch with 48 PoE+ Gigabit ports and dual 10G SFP+ uplinks for high-density access-layer deployments

  • FeaturesWS-C3650-48PD-E Rack-mountable - 1U 48 x 10/100/1000 POE Eth
  • Dimensions17.52 x 17.64 x 1.73 in.
  • 48 PoE+ ports power phones and cameras over Ethernet
  • 1U rack height fits dense server cabinets
  • 2×10G SFP+ uplinks handle high-speed aggregation
  • 2×1G SFP uplinks add flexible fibre links
  • 52 × 17.64 × 1.73 in chassis suits standard racks

Catalyst 3650 48-Port PoE Switch

The EVESKY WS-C3650-48PD-E is a 1U rack-mountable access switch built for enterprise networks. It provides 48 copper ports that run at 10/100/1000 speeds with Power over Ethernet. Two 1G SFP and two 10G SFP+ uplink slots handle aggregation or core links. The IP Services feature set adds advanced routing and security capabilities.

Suits wired LANs needing PoE density and 10G uplinks

Teams deploying IP phones, wireless access points or cameras across 48 endpoints will use every copper port. The dual 10G SFP+ uplinks remove bottlenecks to the distribution layer. Sites without rack space or without any PoE requirement should look at desktop or non-PoE models instead. Environments needing more than two 10G uplinks must select a different chassis.

48 PoE+ ports with dual 10G SFP+ uplinks

The single specification that decides fit is the combination of 48 powered copper ports and two 10G SFP+ uplinks in a 1U frame. That exact port count and uplink mix determines whether the switch matches the access-layer design. If the project calls for a different PoE port count or a different uplink configuration, this model will not align.

Highlights

  • 48 PoE+ ports power phones and cameras over Ethernet
  • 1U rack height fits dense server cabinets
  • 2×10G SFP+ uplinks handle high-speed aggregation
  • 2×1G SFP uplinks add flexible fibre links
  • 52 × 17.64 × 1.73 in chassis suits standard racks

Specifications

ModelWS-C3650-48PD-E
FeaturesWS-C3650-48PD-E
Rack-mountable - 1U
48 x 10/100/1000 POE Ethernet ports
2 x 1G SFP, 2 x 10G SFP+
Dimensions17.52 x 17.64 x 1.73 in.

Questions about this item

How do I mount and power the WS-C3650-48PD-E in a standard rack, and what step is often missed?

Mount the 1U chassis using the included brackets, connect the internal AC supply to a grounded outlet, then insert SFP or SFP+ modules into the two 1G and two 10G uplink cages before powering on.

Which components of the WS-C3650-48PD-E will need replacement during its service life?

The internal power supply and cooling fans are the primary field-replaceable units; SFP and SFP+ transceivers in the four uplink cages can also be swapped as link speeds change.

What limit appears first when all 48 PoE ports run at full 10/100/1000 speed continuously?

The total PoE power budget caps the number of full-power devices before port bandwidth or uplink throughput becomes the bottleneck.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.