We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
1U rack-mount switch with 48 PoE+ ports and four SFP uplinks

EVESKY

EVESKY WS-C2960S-48FPS-L 48-port Gigabit PoE+ network switch 740W

SKU CH-G3C4-TX0R3

A 1U rack-mountable switch with 48 Gigabit PoE+ ports delivering up to 740W total power

  • FeaturesWS-C2960S-48FPS-L Rack-mountable - 1U 48 × Ethernet 10/100/1
  • DimensionsL x W x H : 17.52 x 15.20 x 1.77 in.
  • Weight23.48 lb.
  • Full PoE budget of 740W powers 24 ports at 30W each
  • 48 PoE+ ports deliver up to 15.4W per port for dense deployments
  • Four Gigabit SFP uplinks add fibre aggregation flexibility
  • Optional FlexStack stacking provides 20Gbps throughput between units
  • Compact 1U rack design fits standard cabinets at 17.52 x 15.20 x 1.77in

48-port Gigabit PoE+ switch for dense deployments

The EVESKY WS-C2960S-48FPS-L delivers 48 Ethernet 10/100/1000 PoE+ ports in a 1U rack-mountable chassis. A total PoE budget of 740W powers connected devices directly through the network cable. Four 1 Gigabit Ethernet SFP uplinks provide fibre or copper aggregation. The Catalyst 2960-S platform runs LAN Base software for essential Layer 2 switching.

Suits networks that need full PoE+ on every port

This model fits installations where all 48 ports may draw up to 15.4W simultaneously or up to 24 ports draw the full 30W each. It is not for sites that require Layer 3 routing, higher uplink speeds than 1 Gbps, or a PoE budget above 740W. Buyers needing deeper stacking bandwidth beyond the optional 20 Gbps FlexStack should evaluate other platforms.

740W budget handles 48 phones or 24 high-power APs

With every port active at 15.4W the switch stays within its 740W limit, supporting a full complement of VoIP handsets or standard cameras. When 24 ports run at 30W the budget is also fully used, leaving no headroom for additional PoE devices. Beyond 24 high-power endpoints or 48 standard endpoints the PoE supply runs out, so plan device counts accordingly.

Highlights

  • Full PoE budget of 740W powers 24 ports at 30W each
  • 48 PoE+ ports deliver up to 15.4W per port for dense deployments
  • Four Gigabit SFP uplinks add fibre aggregation flexibility
  • Optional FlexStack stacking provides 20Gbps throughput between units
  • Compact 1U rack design fits standard cabinets at 17.52 x 15.20 x 1.77in

Specifications

ModelWS-C2960S-48FPS-L
FeaturesWS-C2960S-48FPS-L
Rack-mountable - 1U
48 × Ethernet 10/100/1000 PoE+ ports
DimensionsL x W x H : 17.52 x 15.20 x 1.77 in.
Weight23.48 lb.

Questions about this item

What power infrastructure do I need to deliver 740W of PoE+ power to all 48 ports?

The switch requires a standard AC mains connection; its internal power supply converts mains voltage to the 740W PoE+ budget across the 48 Ethernet ports.

Can I keep my existing 10/100 endpoints while using the 10/100/1000 PoE+ ports on this switch?

Yes, each of the 48 ports auto-negotiates at 10, 100 or 1000 Mbps, so legacy 10/100 devices work alongside Gigabit gear without configuration.

How do I verify the 740W PoE budget is actually being distributed across the 48 ports after installation?

Use the LAN Base CLI or web interface to run show power inline; it reports real-time draw per port and confirms the total stays within the 740W limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.