We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver hot-plug power supply module with front handle and ventilation grille

EVESKY

EVESKY PWR-C5-1KWAC= 1000 W AC 100-240 V switch module

SKU CH-JF8C-98B4S

Hot-plug redundant power supply delivers 1000 Watt at AC 100-240 V for Catalyst 9200 and 9200L switches

  • 1000 W output powers Catalyst 9200 and 9200L switches
  • Hot-plug design enables replacement without downtime
  • Redundant architecture protects against single-supply failure
  • AC 100-240 V input supports global voltage ranges
  • Designed for 48-port Catalyst 9200 and 9200L models

1000 W AC hot-plug power module

The EVESKY PWR-C5-1KWAC= is a 1000 W AC hot-plug power supply module designed for Catalyst 9200 and 9200L switches. It accepts a 100-240 V input and delivers redundant power capacity for compatible 48-port PoE switches. Network administrators use it to maintain uptime during module replacement.

Thermals noise and power draw

The module operates within the switch chassis using the system's integrated airflow design. Power draw scales with the connected PoE load up to the 1000 W rating. Acoustic output depends on the host switch fan profile rather than the module itself. Hot-plug capability allows installation without powering down the switch.

Replaces failed or upgrades from lower-wattage units

This module replaces a failed PWR-C5-1KWAC= unit or upgrades a switch running a lower-capacity power supply when PoE demand increases. The jump is worth it when connected devices exceed the existing supply's budget or when redundancy is required for critical network segments. Compatibility is limited to the listed Catalyst 9200 and 9200L models.

Highlights

  • 1000 W output powers Catalyst 9200 and 9200L switches
  • Hot-plug design enables replacement without downtime
  • Redundant architecture protects against single-supply failure
  • AC 100-240 V input supports global voltage ranges
  • Designed for 48-port Catalyst 9200 and 9200L models

Specifications

ModelPWR-C5-1KWAC=
Part NumberPWR-C5-1KWAC

Questions about this item

How do I install the PWR-C5-1KWAC= hot-plug power supply in a Catalyst 9200-48P switch, and which step is often missed?

Slide the module into the power-supply bay until the latch clicks, then verify the status LED turns green; the step often missed is confirming the latch is fully engaged before applying load.

What maintenance or replacement will the PWR-C5-1KWAC= need during its service life?

The internal fan is the only field-replaceable component; plan to swap the fan assembly if bearing noise appears or airflow drops below the switch’s thermal threshold.

At what point does the 1000 W AC 100-240 V supply hit its limit under sustained load?

Continuous draw above 1000 W triggers over-current protection and shuts the module down; the 9200-48P chassis will then rely on the redundant unit if installed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.