We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rack-mount network switch with 48 ports and four SFP+ uplinks

EVESKY

EVESKY C9300L-48P-4X-E network switch 48 ports PoE+ 505 W 4 SFP+ uplink

SKU CH-TQC1-G1K88

Rack-mountable Layer 3 switch with 48 PoE+ ports delivering 505 W and four 10 Gigabit SFP+ uplinks

  • FormatRackmount
  • FeaturesC9300L-48P-4X-E Network Essentials L3 rack-mountable switch
  • DimensionsLength ; 16.1 inch Width ; 17.5 inch height ; 1.7 inch
  • Weight15.5 lbs
  • 48 PoE+ ports deliver power and data to access points and cameras
  • 505 W PoE budget supports high-density Wi-Fi 6 deployments
  • Four 10 Gigabit SFP+ uplinks provide high-speed aggregation to the core
  • Layer 3 routing enables inter-VLAN traffic without a separate router
  • 7 inch 1U rack height fits standard cabinets saving rack space

Rack-mountable 48-port PoE+ switch

The EVESKY C9300L-48P-4X-E is a new rack-mountable switch with 48 copper ports that support 10/100/1000 PoE+ and four 10 Gigabit SFP+ uplinks. It delivers a 505 W PoE+ budget for powering access points, cameras and phones. The unit runs Network Essentials with Layer 3 capability and measures 16.1 by 17.5 by 1.7 inches at 15.5 lbs.

Moving up from non-PoE or lower-power PoE

This model replaces switches that cannot supply 505 W across 48 ports or that lack 10 Gigabit uplinks for aggregation. The jump is worth it when you need full PoE+ on every copper port plus high-speed fibre uplinks for stacking or core connectivity. It also adds the x86 architecture that enables container hosting and third-party scripts.

Suits enterprise wiring closets needing dense PoE+

It suits IT teams deploying Wi-Fi 6 access points, IP cameras or VoIP handsets that require the full 505 W budget. Buyers who need only a few powered ports or who cannot use rack mounting should look at something else. Builds without SFP+ fibre infrastructure will not use the four uplink ports.

Highlights

  • 48 PoE+ ports deliver power and data to access points and cameras
  • 505 W PoE budget supports high-density Wi-Fi 6 deployments
  • Four 10 Gigabit SFP+ uplinks provide high-speed aggregation to the core
  • Layer 3 routing enables inter-VLAN traffic without a separate router
  • 7 inch 1U rack height fits standard cabinets saving rack space

Specifications

ModelC9300L-48P-4X-E
FormatRackmount
FeaturesC9300L-48P-4X-E
Network Essentials
L3
rack-mountable
switch
48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)
PoE+ (505 W)
DimensionsLength ; 16.1 inch
Width ; 17.5 inch
height ; 1.7 inch
Weight15.5 lbs

Questions about this item

How much rack depth does the 16.1 inch length require?

The switch is 16.1 inches deep, so allow at least that much clear space behind the front rails for the chassis and rear cable bend radius.

What is the correct order for inserting the four SFP+ uplink modules?

Power off the switch, insert each SFP+ transceiver until it clicks, then connect the fiber cables before powering the unit back on.

When should the 505 W PoE+ budget be re-evaluated for additional devices?

Recalculate the power budget whenever you add or upgrade powered devices, ensuring the total draw stays within the 505 W limit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.