We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rackmount network switch with 48 ports and four SFP+ uplinks

EVESKY

EVESKY C9200L-48PXG-4X-E 48-port managed network switch

SKU CH-K61F-RAVVQ

Managed 48-port switch with 12 multi-gigabit ports, 36 PoE+ ports and four 10G SFP+ uplinks delivering 1440 W PoE budget

  • FormatRackmount
  • Network Management TypeManaged
  • FeaturesNetwork Essentials L3 12 x 100/1000/2.5G/5G/10GBase- -T + 36
  • 48 ports managed in 1U rack form factor
  • 12 multi-gig ports support 100/1000/2.5G/5G/10GBase-T speeds
  • 36 PoE+ ports deliver up to 1440 W total power budget
  • 4 fixed 10G SFP+ uplinks for high-speed aggregation
  • Network Essentials licensing provides Layer 3 managed features

Product identity

The EVESKY C9200L-48PXG-4X-E is a managed rack-mount switch with 48 ports designed for enterprise access-layer deployments. It combines 12 multi-gigabit copper ports, 36 PoE+ copper ports and four 10 Gigabit SFP+ uplinks in a 1.7 inch high chassis. Network Essentials licensing provides Layer 3 routing and security features for campus and branch networks.

Sustained load behaviour

The switch delivers a PoE+ budget of 1440 W across the 36 powered ports, allowing continuous power to access points, cameras and phones without oversubscription. Multi-gigabit ports operate at 100, 1000, 2.5G, 5G or 10G speeds to match connected device capabilities under constant traffic. Fixed 10G uplinks maintain aggregation bandwidth during peak periods.

Deciding specification

The 1440 W PoE+ budget determines how many high-power devices can run simultaneously on the 36 powered ports. Buyers needing more powered ports or a higher total budget must select a different chassis. Networks requiring only 1G copper connectivity without PoE will find the multi-gigabit and power capacity unused.

Highlights

  • 48 ports managed in 1U rack form factor
  • 12 multi-gig ports support 100/1000/2.5G/5G/10GBase-T speeds
  • 36 PoE+ ports deliver up to 1440 W total power budget
  • 4 fixed 10G SFP+ uplinks for high-speed aggregation
  • Network Essentials licensing provides Layer 3 managed features

Specifications

ModelC9200L-48PXG-4X-E
FormatRackmount
Network Management TypeManaged
FeaturesNetwork Essentials
L3
12 x 100/1000/2.5G/5G/10GBase- -T + 36 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)
PoE+ (1440 W)
switch
managed
rack-mountableHeight
1.7 inch
Weight
12.59 lbs
Width
17.5 inch
Depth
13.8 inch

Questions about this item

How much heat and fan noise should I expect from the C9200L-48PXG-4X-E when it runs continuously with a full 1440 W PoE+ load?

The switch draws up to 1440 W for PoE+ devices; sustained high power increases internal temperature and fan speed, so install it in a ventilated rack with front-to-rear airflow and monitor the built-in temperature sensors via the management interface.

Which cables and transceivers do I need to use the 12 mGig ports, the 36 PoE+ ports and the 4 SFP+ uplinks?

Use Cat6a or better copper for the 100/1000/2.5G/5G/10GBase-T mGig ports, Cat5e or better for the 10/100/1000 PoE+ ports, and 10 Gbps SFP+ modules with matching fibre or DAC cables for the four uplinks.

Can I manage the C9200L-48PXG-4X-E alongside older Catalyst switches that only support Network Essentials licensing?

Yes, it runs Network Essentials with Layer 3 features, so it can join the same management domain, VLAN topology and stacking group as earlier Catalyst models that also use Network Essentials.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.