EVERESTWAY 10 inch 12V 80W Industrial Cooling Fan 2PCS
Two 10-inch 12 V 80 W fans deliver 800 CFM at 2400 RPM with reversible push-pull blades
- High airflow of 800 CFM for efficient engine cooling
- Reversible push/pull design adapts to any radiator layout
- Universal 12V fitment suits cars, trucks, RVs and trailers
- Slim 2.36 inch profile fits tight engine bays
- 80W motor delivers 9.09 m/s wind speed at 2400 RPM
Universal 12V Radiator Fan Kit
This kit supplies two 10-inch 12V electric radiator fans rated at 80W each for engine and auxiliary cooling. Each unit delivers up to 800 CFM at 2400±10% RPM with a maximum wind speed of 9.09 m/s. The curved six-blade design and 2.36-inch slim profile suit cars, pickups, RVs, trucks and trailers that run a 12V system. Mounting brackets and tie straps are included for direct installation.
Upgrade From Stock Or Single Fans
The pair replaces a single factory fan or an under-sized unit when the radiator core measures 10 inches and extra airflow is needed. The reversible push-pull design lets you flip the blades and reverse the wiring to match either puller or pusher orientation without buying a second kit. The jump is worth it when the original fan cannot move enough air at idle or low speed and the 5-7 amp draw per fan is within the vehicle's electrical capacity.
Limits Of The 12V 80W Platform
The fans operate only on 12V systems and draw 5-7 amps each, so the charging circuit and wiring must support the combined load. The 2.36-inch thickness and fixed 10-inch diameter mean they will not fit radiators with smaller cores or tighter shroud clearances. Maximum output is capped at 800 CFM and 2400 RPM, so applications that demand higher static pressure or greater volume will need a different solution.
Highlights
- High airflow of 800 CFM for efficient engine cooling
- Reversible push/pull design adapts to any radiator layout
- Universal 12V fitment suits cars, trucks, RVs and trailers
- Slim 2.36 inch profile fits tight engine bays
- 80W motor delivers 9.09 m/s wind speed at 2400 RPM
Specifications
| Brand | EVERESTWAY |
|---|---|
| Part Number | E009AS1002X2 |
Questions about this item
How much clearance does the 2.36 inch thick fan assembly need behind the radiator?
The fan body measures 2.36 inches thick, so allow at least that depth plus space for the supplied mounting brackets and tie straps when positioning it behind the radiator core.
Which step is often missed when switching the fan from factory pull mode to pusher mode?
After flipping the curved blade over, you must also reverse the wiring polarity; skipping the wire reversal leaves the fan spinning in the original direction.
How often should the six blades and mounting hardware be inspected after installation?
Check the six blades for cracks and re-tighten the mounting brackets and tie straps every few months, especially after off-road use or heavy vibration.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
