EupHHonycs ABS Plastic Round Tubing 25 Pcs 5 Sizes 9.84in White
A set of 25 white ABS hollow tubes in five sizes from 0.08 to 0.24 inch outer diameter, each 9.84 inches long, for scale modelling and DIY projects
- Pipe Size0.08 inches
- Length9.84 inches
- Standards/Certifications9.84×0.08, 9.84×0.12, 9.84×0.16, 9.84×0.20, 9.84×0.24 (inche
- Inside Diameter0.08 inches
- Outside Diameter0.08 inches
- Wall Thickness0.04063 inches
- Ready-to-use kit with 25 tubes across 5 sizes for immediate modelling
- ABS construction gives toughness and easy shaping for detailed work
- Simple cut-and-glue workflow speeds up custom builds
- Suits architectural, railway and scene projects for hobbyists and pros
- Performs down to -40 °C; avoid above 93 °C to prevent deformation
Hobby Tube Assortment
This pack contains 25 white ABS tubes in five different diameters for model making and crafts. Lengths measure 9.84 inches and diameters include .08, .12, .16, .20 and .24 inches with five pieces of each size. The material suits architectural models, railway scenes and general DIY projects. Builders who need tubing for fluid transport or high-pressure lines should look elsewhere.
Material Properties
ABS plastic provides toughness and strength while remaining easy to cut, bend and glue into custom shapes. The hollow tubes have inner diameters of 1mm, 2mm, 2.5mm, 4mm and 5mm corresponding to the outer sizes. Performance holds down to -40°C but deformation can occur above 93°C. Users requiring continuous exposure to higher heat must choose a different material.
Project Planning
Verify that the five available diameters cover every structural or detail element your design requires. Confirm that a maximum service temperature of 93°C fits the environment where the finished model will be displayed or stored. Ensure your cutting tools and plastic cement are compatible with ABS before starting assembly. No adhesive or finishing supplies are included in the bag.
Highlights
- Ready-to-use kit with 25 tubes across 5 sizes for immediate modelling
- ABS construction gives toughness and easy shaping for detailed work
- Simple cut-and-glue workflow speeds up custom builds
- Suits architectural, railway and scene projects for hobbyists and pros
- Performs down to -40 °C; avoid above 93 °C to prevent deformation
Specifications
| Pipe Size | 0.08 inches |
|---|---|
| Length | 9.84 inches |
| Standards/Certifications | 9.84×0.08, 9.84×0.12, 9.84×0.16, 9.84×0.20, 9.84×0.24 (inches) 5 each |
| Inside Diameter | 0.08 inches |
| Outside Diameter | 0.08 inches |
| Wall Thickness | 0.04063 inches |
| End Connections | 2mm, 3mm, 4mm, 5mm, 6mm |
| Fractional Size | 0.08 inches |
| Color/Finish | White |
| Compatibility/Fitment | 2mm, 3mm, 4mm, 5mm, 6mm |
| National Hose Thread Size | 0.08 in x 2 in x 3 in |
| Brand | EupHHonycs |
| Model | 675936_1_MwA6Lmss |
| Item Count | 25 Count |
| Selling Unit | Count 25 |
| Part Number | 675936_1_JJpM0jrF |
Questions about this item
Will the ABS tubes need replacement if used near a heat source?
The material is rated for continuous use down to -40 °C but should not exceed 93 °C; above that temperature deformation can occur, so plan to replace any tube exposed to higher heat.
Which dimension limits how much fluid or filament can pass through the smallest tube?
The 2 mm outside-diameter tube has a 1 mm inner diameter, so that 1 mm bore is the first restriction on flow or insertion.
How hot do the white ABS tubes get when left under a desk lamp all day?
ABS softens above 93 °C; a typical desk lamp will not reach that temperature, so the tubes stay near ambient temperature and produce no noticeable heat of their own.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
$151.99
0.00179917BTC
In stock
BoatBuckle
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent
$25.99
0.00030765BTC
In stock