We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small white rectangular LED voltage testers side by side

Euogeudel esedese 2-Pack White LED Battery Voltage Tester 7-55V DC

SKU CH-0HN9-BFS2N

A two-piece battery level indicator monitors 7-55 V DC across lithium, LiFePO4 and lead-acid types with custom thresholds, low-voltage alarm.

  • FeaturesNO, Battery Powered, false
  • Height46 L x 15 W x 3 H millimeters
  • Width46 L x 15 W x 3 H millimeters
  • Length46 L x 15 W x 3 H millimeters
  • Sports Team2 Piece
  • Monitors 7-55V DC across lithium, LiFePO4 and lead-acid chemistries
  • Custom high/low voltage thresholds enable precise capacity tracking per battery type
  • Power-off memory retains all settings including battery type and backlight timer
  • Low-voltage alarm prompts timely recharge while adjustable backlight saves energy
  • Compact 46x15x3mm module with bright white LED display fits tight installs

2-Pack 7-55V DC Battery Indicator

This two-piece set provides white LED voltage readouts for 7-55V DC systems. It suits installers and hobbyists who need a compact monitor for Lithium-ion, LiFePO4 or Lead-Acid batteries in automotive, solar or DIY builds. Each module measures 46 by 15 by 3 millimetres for a slim profile.

Upgrade from basic gauges

Replaces simple analogue meters or fixed-range indicators that lack memory or alarm functions. The jump is worthwhile when you need custom high and low voltage thresholds for 12, 24, 36 or 48 volt Lead-Acid packs, 3S-12S Lithium-ion or 3S-14S LiFePO4 configurations. Settings survive power loss without re-entry.

Capacity and headroom

Comfortably tracks state of charge across the full 7-55V window with a bright white display readable in daylight. The adjustable backlight timer reduces draw during long-term logging. It runs out of range below 7 volts or above 55 volts, and it does not log history or communicate data externally.

Highlights

  • Monitors 7-55V DC across lithium, LiFePO4 and lead-acid chemistries
  • Custom high/low voltage thresholds enable precise capacity tracking per battery type
  • Power-off memory retains all settings including battery type and backlight timer
  • Low-voltage alarm prompts timely recharge while adjustable backlight saves energy
  • Compact 46x15x3mm module with bright white LED display fits tight installs

Specifications

BrandEuogeudel, esedese
FeaturesNO, Battery Powered, false
Height46 L x 15 W x 3 H millimeters
Width46 L x 15 W x 3 H millimeters
Length46 L x 15 W x 3 H millimeters
Sports Team2 Piece

Questions about this item

What are the exact dimensions I need for a cut-out to mount the 46x15x3mm module?

Cut a rectangular opening 46 mm long by 15 mm wide; the module is only 3 mm thick so it sits almost flush against the panel.

Which wires do I connect first to avoid losing the custom voltage settings during installation?

Apply 7-55 V DC to the power terminals before wiring the signal leads; the built-in memory keeps your battery-type and backlight choices once power is live.

When should I expect to replace the white LED backlight in a 12 V automotive gauge cluster?

The white LEDs are rated for tens of thousands of hours; in typical 12 V dash use they will outlast the vehicle’s instrument panel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.