We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.6 ft Mini SAS SFF-8087 36-pin male-to-male cable

ETopSell

ETopSell Internal Mini SAS Cable SFF-8087 36-Pin Male-to-Male 1.6ft

SKU CH-KKT0-FQRQK

A 1.6ft SFF-8087 36-pin male-to-male cable linking SAS or SATA devices inside servers and RAID controllers

  • Mini SAS 36-pin SFF-8087 male connectors link RAID controllers and HBA cards
  • 6 ft length keeps internal server routing short and tidy
  • AWG30 high-bandwidth low-skew wire supports up to 6 Gbps per channel
  • 100 Ohm impedance maintains signal integrity across the link
  • 100 % inspected and visually checked before packing for reliable quality assurance

Internal Mini SAS Cable 1.6ft

The ETopSell SFF-8087 cable connects two Mini SAS 36-pin male ports inside a server or storage chassis. It links RAID controllers, SAS or SATA HBAs and backplanes for direct-attached storage. The 1.6 foot length suits tight internal routing between adjacent devices. Builders needing longer runs or external connectors should choose a different cable.

Sustained 6Gbps per channel throughput

AWG30 high-bandwidth low-skew wire maintains 100 Ohm impedance for reliable signalling at up to 6Gbps per lane. The construction supports continuous data transfer across all channels without the signal degradation seen in lesser cables during extended workloads. Error-free operation is verified by 100% inspection before packing.

Low-profile passive thermal profile

As a passive copper assembly the cable adds no active cooling requirement and generates no audible noise. Power draw is limited to the signalling current of the attached controllers. The slim black jacket fits cleanly in dense drive bays without obstructing airflow to nearby components.

Highlights

  • Mini SAS 36-pin SFF-8087 male connectors link RAID controllers and HBA cards
  • 6 ft length keeps internal server routing short and tidy
  • AWG30 high-bandwidth low-skew wire supports up to 6 Gbps per channel
  • 100 Ohm impedance maintains signal integrity across the link
  • 100 % inspected and visually checked before packing for reliable quality assurance

Specifications

No published specifications for this item yet.

Questions about this item

Will the 1.6ft SFF-8087 cable generate noticeable heat or draw extra power when running continuously in a server?

The passive AWG30 cable carries signals only and does not consume power or produce measurable heat during all-day operation.

What controller or backplane must I already have to use this Mini SAS 36-pin male-to-male cable?

You need a RAID controller, SAS/SATA HBA or server backplane with a matching SFF-8087 36-pin female port on each end.

Can this 6Gbps-per-channel Mini SAS cable work with older 3Gbps SAS or SATA drives in the same enclosure?

Yes, the SFF-8087 link auto-negotiates to 3Gbps so legacy drives operate normally alongside newer ones.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.