ETCR
ETCR 9100 High and Low Voltage Clamp Ammeter AC 0.00mA~600A F33mm electrician tool
Measures AC current from .00 mA to 600 A with a 33 mm jaw and wireless data reception up to 30 metres
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Measures up to 600 A AC current for high-voltage lines
- Resolves 0.00 mA leakage current for precise fault finding
- 33 mm jaw fits thick conductors in tight panels
- Wireless receiver reads data through barriers at 30 m distance
- Converts to low-voltage clamp meter without insulated rods
High-voltage clamp ammeter
The ETCR 9100 is a high and low voltage clamp ammeter designed for electricians who need to measure AC current on live conductors. It combines a high-voltage detector with a wireless receiver and insulating rods for safe distance readings. The clamp jaw accepts conductors up to 33 mm in diameter. The instrument is supplied new in a single box.
Suited for overhead and panel work
This meter suits technicians measuring load current on distribution lines or verifying leakage in switchgear without breaking the circuit. Wireless transmission reaches 30 metres through building structures. Buyers who require DC current measurement or a built-in display on the clamp head should look at other instruments.
0.00 mA to 600 A AC range
The single specification that decides fit is the AC measurement span of 0.00 mA to 600 A, covering both minute leakage currents and heavy feeder loads. No batteries are included in the package due to shipping restrictions. The manufacturer provides a three-year parts and one-year labour guarantee.
Highlights
- Measures up to 600 A AC current for high-voltage lines
- Resolves 0.00 mA leakage current for precise fault finding
- 33 mm jaw fits thick conductors in tight panels
- Wireless receiver reads data through barriers at 30 m distance
- Converts to low-voltage clamp meter without insulated rods
Specifications
| Brand | ETCR |
|---|---|
| Model | 9100 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
What does the 600A range mean when I clamp it on a live conductor?
It means the meter can read AC current from 0.00mA up to 600A on both high-voltage lines using the insulated rods and on low-voltage circuits without them.
How does the wireless link work and what limits its range?
The receiver picks up data through floor slabs or open air up to 30 metres, so you can watch the reading from the ground while the clamp is on an overhead line.
Will the 33mm jaw fit the cable tray I work on?
The jaw opens to 33mm, so any single conductor or small bundle that fits inside that diameter can be measured without separating the wires.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
