We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75mm PLA filament spool 1kg vacuum sealed

eSUN

eSUN Super Tough PLA Filament 1.75mm 1kg Black PLA-ST +/- 0.05mm

SKU CH-Y3Z1-3B26T

Toughened PLA filament with 90% elongation at break and 11 times standard impact strength for functional mechanical parts

  • ColorBlack
  • MaterialPLA plastic
  • Diameter1.75 mm
  • FeaturesPLA Filament
  • Weight1kg
  • Super tough PLA with 11× impact strength versus standard PLA
  • Elongation at break up to 90 % for durable mechanical parts
  • Dimensional tolerance ± .05 mm for consistent feeding and low warping
  • Tangle-free 1.75 mm spool vacuum-sealed with desiccant for reliable storage
  • Prints at 200–230 °C nozzle, 45–60 °C bed, 40–100 mm/s speed

Mechanical-grade PLA for functional parts

eSUN Super Tough PLA (PLA-ST) is a toughened filament designed for mechanical models, structural components and functional prototypes. It delivers up to 90% elongation at break and 11 times the impact strength of standard PLA. The 1.75 mm diameter is held to a ±0.05 mm tolerance on a 1 kg spool, giving consistent feeding and stable prints with good layer bonding and minimal stringing.

Makers needing impact resistance.

This material suits engineers and hobbyists printing brackets, enclosures, drone frames or consumer-electronics housings that must survive drops or vibration. It prints at ordinary PLA temperatures (200–230 °C nozzle, 45–60 °C bed) on most FDM printers. Builders who need heat deflection above 60 °C, soluble support compatibility or food-safe certification should choose a different polymer.

Vacuum-sealed spool with desiccant keeps filament

Each 1 kg reel ships in a vacuum bag with a desiccant pack, preventing moisture uptake and dust contamination that cause bubbling or nozzle clogs. The tight winding avoids tangles and overlap, so the filament feeds smoothly during long, unattended prints. Store the spool sealed when not in use and retract filament after printing to extend shelf life.

Highlights

  • Super tough PLA with 11× impact strength versus standard PLA
  • Elongation at break up to 90 % for durable mechanical parts
  • Dimensional tolerance ± .05 mm for consistent feeding and low warping
  • Tangle-free 1.75 mm spool vacuum-sealed with desiccant for reliable storage
  • Prints at 200–230 °C nozzle, 45–60 °C bed, 40–100 mm/s speed

Specifications

BrandeSUN
Model3D printer filament
ColorBlack
MaterialPLA plastic
Diameter1.75 mm
FeaturesPLA Filament
Weight1kg

Questions about this item

Which 3D printers accept the 1.75 mm diameter of this filament?

It works with most FDM 3D printers that take 1.75 mm filament; check your printer’s specification to confirm compatibility.

Will the recommended 200–230 °C nozzle and 45–60 °C bed temperatures suit an older printer with a basic hot-end?

Yes, those temperatures are within the range of standard PLA-capable hot-ends, though you may need to reduce speed to 40–100 mm/s for reliable feeding.

How can I verify the filament is feeding correctly during the first print?

Watch for smooth extrusion at 215 °C with consistent layer bonding, minimal stringing, and no nozzle clogging — signs the ±0.05 mm tolerance is holding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.