We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White 1.75 mm PLA+ filament spool in vacuum-sealed bag

eSUN PLA+ Filament 1.75mm 1KG Cold White 3D Printers

SKU CH-R6ZB-91BS1

Cold White 1.75 mm PLA+ filament on a 1 kg spool with ±0.03 mm tolerance for consistent, high-speed FDM printing

  • ColorA-cold White
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight1 kilograms
  • Higher strength and toughness than standard PLA with improved material formulation
  • Consistent feeding at high speeds compatible with Bambu Lab X1, Creality K1 and AnkerMake M5
  • Tangle-free winding and precise diameter tolerance prevent nozzle clogging during long prints
  • Dimensional accuracy of +/- 0.03 mm ensures stable extrusion and high print success rate
  • Broad FDM printer compatibility covers Prusa, UltiMaker, Ender 3 and many other models

What this filament is and who it suits

eSUN PLA+ is a 1.75 mm polylactic acid filament on a 1 kg spool. The Cold White colour suits makers printing functional parts, cosplay props or decorative models. Enhanced strength and toughness reduce brittleness compared with standard PLA. Low shrinkage and minimal warping help indoor printers achieve reliable results without an enclosure.

Printing envelope defined by temperature and speed

Recommended nozzle temperature sits between 210 and 230 °C with 215 °C as the starting point. Heated bed range is 45 to 60 °C. Fan speed should run at 100 %. Print speed window spans 40 to 100 mm/s, matching the capabilities of high-speed machines such as Bambu Lab X1 series, Creality K1 series and AnkerMake M5. Dimensional tolerance holds at ±0.03 mm for consistent extrusion.

Capacity and where it runs out

Each spool delivers 340 to 350 metres of filament, enough for multiple medium-sized prints or a single large project. The vacuum-sealed bag with desiccant keeps moisture low during storage. PLA+ is not suited for high-temperature applications or parts requiring the chemical resistance of engineering-grade polymers. Buyers needing higher heat deflection or UV stability should consider other material families.

Highlights

  • Higher strength and toughness than standard PLA with improved material formulation
  • Consistent feeding at high speeds compatible with Bambu Lab X1, Creality K1 and AnkerMake M5
  • Tangle-free winding and precise diameter tolerance prevent nozzle clogging during long prints
  • Dimensional accuracy of +/- 0.03 mm ensures stable extrusion and high print success rate
  • Broad FDM printer compatibility covers Prusa, UltiMaker, Ender 3 and many other models

Specifications

BrandeSUN
ColorA-cold White
MaterialPolylactic Acid
Diameter1.75
Weight1 kilograms

Questions about this item

Cold White is one of 32 colours — how do I pick the right one for my project?

Cold White is a crisp, neutral white that shows fine detail and photographs well; choose it when you want clean, professional-looking parts without a warm or yellow tint.

The spool is rated for 40–100 mm/s — what does that mean on my printer?

It means the filament feeds reliably at typical speeds up to 100 mm/s on compatible high-speed machines such as Bambu Lab X1, Creality K1 or AnkerMake M5, provided you stay within the 210–230 °C nozzle range.

The diameter tolerance is ±0.03 mm on 1.75 mm filament — what does that cap in practice?

That tight tolerance keeps extrusion consistent, prevents nozzle clogs and reduces stringing so dimensional accuracy on printed parts stays predictable across the full 340–350 m length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.