We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red PLA+ filament spool, 1.75 mm, 1 kg

eSUN

eSUN PLA+ Filament 1.75 mm 1 kg Fire Engine Red

SKU CH-HD8V-GWR0M

PLA+ filament in Fire Engine Red on a 1 kg spool with ±0.03 mm tolerance for reliable high-speed FDM printing

  • ColorFire Engine Red
  • MaterialPLA
  • Diameter1.75 mm
  • Compatible SystemFor All FDM 3D Printer
  • Weight2.20 lbs. (1 kg)

Color Fire Engine Red

Show 10 more configurations
  • Stronger, tougher prints with enhanced PLA+ formulation
  • High-speed ready for 40-100 mm/s printing
  • Tangle-free 340-350 m spool feeds smoothly
  • Precise +/- 0.03 mm diameter for consistent extrusion
  • Works with all FDM printers including Bambu Lab, Creality, Prusa

PLA+ Filament for FDM Printers

eSUN PLA+ is an enhanced polylactic-acid filament supplied on a 1 kg spool with a 1.75 mm diameter. The material delivers higher strength and toughness than standard PLA while keeping low shrinkage and minimal warping. It is formulated for reliable indoor printing on most fused-deposition-modelling machines.

Upgrade from Basic PLA

Switch when you need stronger functional parts or consistent results at higher print speeds. The tight ±0.03 mm tolerance and 340–350 m length reduce failed prints caused by diameter variation or tangling. The jump is worth it for mechanical components, cosplay armour or any project where standard PLA snaps too easily.

Drop-in Spool with Vacuum Seal

The filament arrives vacuum-sealed with desiccant so it feeds cleanly without pre-drying. Mount the spool, set the nozzle to 210–230 °C and the bed to 45–60 °C, then print at 40–100 mm/s with the fan at 100 %. Poor bed adhesion is the most common issue; use a textured sheet, PEI or PVP glue to secure the first layer.

Highlights

  • Stronger, tougher prints with enhanced PLA+ formulation
  • High-speed ready for 40-100 mm/s printing
  • Tangle-free 340-350 m spool feeds smoothly
  • Precise +/- 0.03 mm diameter for consistent extrusion
  • Works with all FDM printers including Bambu Lab, Creality, Prusa

Specifications

BrandeSUN
ColorFire Engine Red
MaterialPLA
Diameter1.75 mm
Compatible SystemFor All FDM 3D Printer
Weight2.20 lbs. (1 kg)

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1.75 mm diameter spool fit my printer's filament holder?

The spool holds 1 kg of 1.75 mm filament wound to 340-350 m total length, a standard size that fits most FDM printer holders.

What printing temperature and bed temperature should I set for this PLA+?

Print at 210-230 °C with the bed at 45-60 °C; the manufacturer recommends 215 °C nozzle temperature and 100 % fan speed for best results.

How should I store the filament after opening the vacuum-sealed bag?

Keep it in the original vacuum bag with the desiccant sachet, or move it to an airtight container with fresh desiccant to prevent moisture absorption.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.