We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Spoolless matte PLA coil in grey, vacuum-sealed

eSUN

eSUN Matte PLA Refilament 1.75 mm 1 kg Grey

SKU CH-V0FS-NV7TH

Matte PLA refill filament delivers a smooth, layer-free finish with high toughness and easy support removal for FDM printers

  • ColorGrey
  • MaterialPLA
  • Diameter1.75 mm
  • Compatible SystemFor FDM 3D Printer
  • Matte finish hides layer lines for smooth prints
  • 75 mm diameter feeds reliably on FDM printers
  • High toughness resists cracking on functional parts
  • Supports peel away cleanly without surface damage
  • Vacuum-sealed bag with desiccant keeps filament dry

Matte PLA refill filament for FDM printers

This spool-less 1.75 mm PLA comes in a 1 kg vacuum-sealed pack with desiccant. It targets makers who already own a reusable spool holder and want a matte finish without visible layer lines. The material prints cleanly on most common FDM machines including Bambu Lab, Creality, Prusa and Voron platforms.

Matte surface with higher toughness than standard

The filament delivers a uniform matte appearance and improved impact resistance so printed parts resist cracking. Support structures peel away cleanly leaving the surface unmarked. At the recommended 215 °C nozzle temperature the material feeds steadily and produces dimensionally accurate prints with minimal warping or stringing.

Spool-less format requires a compatible holder

Because the refill arrives without a reel it must be mounted on a separate spool holder such as the Bambu Lab design or the forthcoming eSUN holder. Printing temperature range is 190 to 230 °C and the manufacturer suggests textured paper, PVP glue or PEI for bed adhesion. Without a holder the filament cannot be used directly on a printer.

Highlights

  • Matte finish hides layer lines for smooth prints
  • 75 mm diameter feeds reliably on FDM printers
  • High toughness resists cracking on functional parts
  • Supports peel away cleanly without surface damage
  • Vacuum-sealed bag with desiccant keeps filament dry

Specifications

BrandeSUN
ColorGrey
MaterialPLA
Diameter1.75 mm
Compatible SystemFor FDM 3D Printer

Questions about this item

Will this 1.75 mm spoolless PLA feed reliably on my Ender 3 without a dedicated spool holder?

The filament is wound tangle-free with tight diameter tolerance for smooth feeding, but it requires a spool holder such as the Bambu Lab holder or the upcoming eSUN holder; it cannot sit directly on the Ender 3's stock spool mount.

What first-layer results confirm the matte PLA is printing at the recommended 215 °C on a textured PEI sheet?

A consistent, matte finish with no visible layer lines, minimal stringing, and supports that peel away cleanly indicate the temperature and bed adhesion are correct.

Does the 1 kg vacuum-sealed pack include a reusable spool or must I buy one separately?

The package contains only the spoolless filament coil, desiccant, and vacuum bag; a compatible spool holder must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.