We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey matte PLA filament on a paper spool, 1.75 mm diameter

eSUN

eSUN Matte PLA Filament 1.75mm 1KG Grey

SKU CH-7E7Y-AZA58

Matte PLA filament on a 1 kg spool prints at 190–230 °C with minimal layer lines, low warping and tangle-free feeding for FDM printers

  • ColorGrey
  • MaterialPLA
  • Diameter1.75 mm
  • Compatible SystemFor FDM 3D Printer
  • Matte finish hides layer lines for cleaner parts
  • Higher toughness resists cracking on functional prints
  • Tight 1.75 mm tolerance feeds smoothly without jams
  • Prints at 190–230 °C with 215 °C recommended
  • Vacuum-sealed spool with desiccant keeps filament dry

eSUN Matte PLA Filament 1.75mm 1KG Grey

eSUN Matte PLA Filament is a 1.75 mm PLA spool supplied on a recyclable paper reel. It produces a delicate matte finish that hides layer lines and yields printed parts with higher toughness than standard PLA. The filament is wound to tight tolerances for tangle-free feeding and comes vacuum-sealed with desiccant for moisture protection.

Makers wanting a low-warp, matte finish

This filament suits hobbyists and professionals printing decorative models, cosplay props, toys or functional brackets on common FDM printers such as Bambu Lab, Prusa, Ender or Voron machines. Users whose printers require a different diameter or who need high-temperature resistance should look at alternative materials.

Diameter 1.75 mm decides fit

The single specification that determines compatibility is the 1.75 mm diameter; the spool will only work on printers designed for that filament size. Print temperature range is 190 to 230 °C with a recommended setting of 215 °C.

Highlights

  • Matte finish hides layer lines for cleaner parts
  • Higher toughness resists cracking on functional prints
  • Tight 1.75 mm tolerance feeds smoothly without jams
  • Prints at 190–230 °C with 215 °C recommended
  • Vacuum-sealed spool with desiccant keeps filament dry

Specifications

BrandeSUN
ColorGrey
MaterialPLA
Diameter1.75 mm
Compatible SystemFor FDM 3D Printer

Questions about this item

Should I choose the 1KG Grey spool or a different colour for my FDM printer?

The 1KG Grey spool suits general-purpose printing on any compatible FDM machine; pick another of the eight colours only if your project needs a specific shade.

What nozzle temperature should I set for the recommended 215°C figure?

Start at 215°C for most prints; the filament prints reliably anywhere between 190°C and 230°C depending on speed and cooling.

Does the 1.75mm diameter work with a Bowden extruder on my printer?

Yes, the tight 1.75mm tolerance and low-friction winding feed smoothly through Bowden tubes without clogging or tangling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.