We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Estry

Estry V262 850mAh 3.7V standard battery

SKU CH-Q29Q-9ZHDV MPN V262

Lithium replacement cell delivers 850 mAh at 3.7 V for Motorola V262, i710, V551, i90c and V540 handsets

  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLithium
  • Battery Capacity850mAh
  • Battery Voltage3.7
  • Replaces original Motorola V262 battery with identical 850mAh 3.7V specification
  • Built-in overcharge over-discharge over-voltage and short-circuit protection extends usable life
  • Certified to ISO9001 RoHS CE UN38.3 and MSDS safety standards
  • Slim 57.0 x 35.0 x 4.0mm profile fits handset without bulge
  • Compatible with V262 i710 V551 i90c V540 and part numbers SNN5704 SNN5717 SNN5683 SNN5683A

Replacement Battery for Motorola Handsets

The Estry V262 is a 3.7V lithium cell rated at 850mAh and 3.15Wh, built to match the original specifications for the V262, i710, V551, i90c and V540 models. It replaces part numbers SNN5704, SNN5717, SNN5683 and SNN5683A and carries ISO9001, RoHS, CE, UN38.3 and MSDS certification. The single-pack unit measures 57.0 x 35.0 x 4.0mm and weighs 45.0g.

Thermal Behaviour and Power Draw

In normal use the lithium chemistry delivers a steady 3.7V output with built-in protection against overcharge, over-discharge, over-voltage and short-circuit events. The cell runs cool during typical standby and talk time, and the protection circuitry limits current spikes that could stress the handset. No active cooling is required and the pack adds negligible heat to the device chassis.

Sustained Load Performance

Under continuous discharge the 850mAh capacity provides consistent voltage until the protection circuit cuts off to prevent deep discharge. The safety features maintain stable operation throughout the cycle without thermal runaway. The pack is not suited for devices demanding higher capacity or different form factors, and buyers needing extended runtime or a different connector should verify compatibility before ordering.

Highlights

  • Replaces original Motorola V262 battery with identical 850mAh 3.7V specification
  • Built-in overcharge over-discharge over-voltage and short-circuit protection extends usable life
  • Certified to ISO9001 RoHS CE UN38.3 and MSDS safety standards
  • Slim 57.0 x 35.0 x 4.0mm profile fits handset without bulge
  • Compatible with V262 i710 V551 i90c V540 and part numbers SNN5704 SNN5717 SNN5683 SNN5683A

Specifications

BrandMotoroIa
TypeBatteries
Battery Pack1-pack
Battery TypeLithium
Battery Capacity850mAh
Battery Voltage3.7

Questions about this item

How do I install the Estry V262 battery in my Motorola V262, and what step is often missed?

Power off the phone, remove the back cover, lift the old pack, align the three contacts on the 57.0 x 35.0 x 4.0 mm cell, press firmly until it clicks, then replace the cover before turning the handset on.

What maintenance or replacement will the V262 850 mAh lithium pack need over time?

The lithium cell requires no scheduled maintenance; when talk time falls well below the original 3.15 Wh rating, replace the pack with a new 3.7 V 850 mAh unit.

What limit appears first during sustained use of this 3.7 V 850 mAh battery?

The 850 mAh capacity determines how long the phone runs between charges; under continuous load the voltage will sag once the stored 3.15 Wh is depleted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.