Estry
Estry Standard Battery 3000mAh 11.1V for Trimble Ranger 3 Series
Replacement lithium battery delivering 11.1 V and 3000 mAh for Trimble Ranger 3 and TSC3 series devices
- TypeBatteries
- Battery Pack1-pack
- Battery TypeLithium
- Battery Capacity3000mAh
- Battery Voltage11.1
- Direct replacement for Trimble Ranger 3 series
- 3000 mAh lithium cell delivers 11.1 V power
- Built-in protection against overcharge and short circuit
- Certified to ISO 9001, RoHS, CE, UN 38.3 and MSDS
- Compact 96.75 × 68.16 × 31.65 mm form factor
Replacement Battery for Trimble Ranger 3 Series
This Estry lithium battery replaces the original pack in Trimble Ranger 3RC, 3XE, 3XR, 3, 3XC, 3L and TSC3 units. It matches the factory specifications for voltage and fit so field crews can swap it without tools. The cell carries ISO9001, RoHS, CE, UN38.3 and MSDS certifications for regulated environments.
Capacity and Runtime
Rated at 3000mAh and 11.1V, the pack delivers 37.74Wh of energy for extended survey sessions. In typical GNSS logging workflows it powers a full day before needing a recharge. Heavy radio use or continuous screen brightness will draw the reserve faster and may require a mid-day top-up.
Upgrade from Worn Originals
The battery directly replaces part numbers ACCAA-112, 990652-004756, 890-0163-XXQ, 890-0163 and KLN01117 when the original no longer holds charge. It restores runtime to factory levels but does not increase capacity beyond the OEM design. Teams needing multi-day autonomy without charging should carry spare packs instead.
Highlights
- Direct replacement for Trimble Ranger 3 series
- 3000 mAh lithium cell delivers 11.1 V power
- Built-in protection against overcharge and short circuit
- Certified to ISO 9001, RoHS, CE, UN 38.3 and MSDS
- Compact 96.75 × 68.16 × 31.65 mm form factor
Specifications
| Brand | Trimble |
|---|---|
| Type | Batteries |
| Battery Pack | 1-pack |
| Battery Type | Lithium |
| Battery Capacity | 3000mAh |
| Battery Voltage | 11.1 |
Questions about this item
Will this 3000mAh 11.1V pack fit my Ranger 3XE without modifying the battery door?
The replacement matches the original ACCAA-112 dimensions of 96.75 x 68.16 x 31.65 mm and weighs 248.0 g, so it seats in the existing compartment with no alteration.
How do I verify the battery is charging correctly after inserting it into my TSC3?
The TSC3 power LED shows amber while charging and turns green once full; the on-screen battery gauge reports 11.1 V and the rated capacity when the pack is healthy.
Does the box include a charger or only the 3400mAh lithium cell?
Only the single battery pack is supplied; a compatible Trimble charger must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



