Estry
Estry Standard Battery 1800mAh 2.4V for Flip Ultra U11204 FVBPU2
Ni-MH replacement battery delivers 1800mAh at 2.4V for Flip Ultra U11204 camcorders
- TypeBatteries
- Battery Pack1-pack
- Battery TypeNi-MH
- Battery Capacity1800mAh
- Battery Voltage2.4
- Direct replacement for Flip Ultra U11204
- 1800mAh Ni-MH capacity for extended recording time
- 4V output matches original battery specification
- Built-in overcharge, over-discharge and short-circuit protection
- Certified to ISO9001, RoHS, CE and UN38.3 standards
Estry Ni-MH Replacement Battery
This Estry Ni-MH battery replaces the original FVBPU2 pack for the Flip Ultra U11204 camcorder. It delivers 1800mAh capacity at 2.4V and is sold as a single unit. The cell chemistry matches the factory specification for direct compatibility.
Compact Pack With Built-In Protection
The pack measures 50.4 x 28.9 x 14.5mm and weighs 98.0g, matching the original form factor for a secure fit in the camera compartment. Integrated circuitry provides overcharge, over-discharge, over-voltage and short-circuit protection during daily use and charging cycles.
Ni-MH Chemistry Limits
Ni-MH cells exhibit self-discharge when stored for long periods and perform best when cycled regularly rather than left at full or empty charge. Capacity will gradually reduce after several hundred charge cycles, a normal characteristic of this chemistry.
Highlights
- Direct replacement for Flip Ultra U11204
- 1800mAh Ni-MH capacity for extended recording time
- 4V output matches original battery specification
- Built-in overcharge, over-discharge and short-circuit protection
- Certified to ISO9001, RoHS, CE and UN38.3 standards
Specifications
| Brand | Flip |
|---|---|
| Type | Batteries |
| Battery Pack | 1-pack |
| Battery Type | Ni-MH |
| Battery Capacity | 1800mAh |
| Battery Voltage | 2.4 |
Questions about this item
What voltage does the 1800mAh Ni-MH pack deliver, and what runtime ceiling does that set?
The pack supplies 2.4V at 1800mAh, matching the original Flip Ultra U11204 specification so the camcorder draws the same current profile it was designed for.
Will the 50.4 x 28.9 x 14.5mm, 98.0g pack fit the Ultra U11204 battery door?
Yes — those exact dimensions and weight replicate the OEM FVBPU2 cell, so the latch closes flush without shims or force.
How do I install it, and which polarity mistake do users repeat?
Slide the pack in with the labelled side facing the contact strip; reversing it bends the spring tabs and prevents the camera from powering on.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



