We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular alkaline battery pack, matte finish, 245.8 by 78.05 by 39.26 millimetres, 1102.2 grams

Estry

Estry Standard Battery 17000mAh 9.0V for Artex ELT 110-4 ELT-200

SKU CH-02JJ-C56V4

Replacement alkaline battery pack delivers 17000mAh at 9.0V for Artex ELT 110-4 and ELT-200 emergency locator transmitters

  • Specifications9
  • Battery Pack1 Year
  • 17000mAh capacity powers ELT 110-4 and ELT-200 units
  • 0V 153.0Wh output matches original battery specifications
  • ISO9001, CE, RoHS, UN38.3 and MSDS certified for safety
  • Overcharge, over-discharge, over-voltage and short-circuit protection built in
  • 8 x 78.05 x 39.26mm form factor fits existing mount

Replacement Battery for Artex ELT 110-4 and ELT-200

This Estry standard battery replaces the original power source for Artex ELT 110-4 and ELT-200 emergency locator transmitters. It delivers a nominal 9.0 V output with a rated capacity of 17000 mAh, providing 153.0 Wh of energy. The pack measures 245.8 x 78.05 x 39.26 mm and weighs 1102.2 g. It is certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards.

Suitable for Maintaining Certified ELT Installations

Aviation maintenance teams and operators of Artex ELT 110-4 or ELT-200 units can use this battery as a direct replacement matching part numbers 452-0130, BP-1015, 453-0190 and 452-3063. Buyers needing a different voltage, a higher capacity, or a battery for other ELT models should look elsewhere. The alkaline chemistry and physical dimensions are fixed to the original specification.

Steady Output During Extended Emergency Transmission

Under sustained load the battery maintains its 9.0 V nominal voltage throughout the discharge cycle defined by the ELT specification. Integrated protection guards against overcharge, over-discharge, over-voltage and short-circuit conditions during long storage or active beacon operation. The 153.0 Wh rating supports the regulatory transmission duration without voltage sag that could interrupt the distress signal.

Highlights

  • 17000mAh capacity powers ELT 110-4 and ELT-200 units
  • 0V 153.0Wh output matches original battery specifications
  • ISO9001, CE, RoHS, UN38.3 and MSDS certified for safety
  • Overcharge, over-discharge, over-voltage and short-circuit protection built in
  • 8 x 78.05 x 39.26mm form factor fits existing mount

Specifications

BrandAlkaline
Model18000mAh
Specifications9
Battery Pack1 Year

Questions about this item

Which Artex ELT models does the 17000mAh 9.0V battery replace?

This battery replaces the original power pack in Artex ELT 110-4 and ELT-200 units, matching part numbers 452-0130, BP-1015, 453-0190 and 452-3063.

Can the 17000mAh 9.0V pack be used in older Artex ELTs that took the 452-0130 or BP-1015 cells?

Yes, the pack is built to the same 9.0V 17000mAh specification as the 452-0130 and BP-1015 originals, so it fits and powers those legacy ELTs directly.

How do I verify the 17000mAh 9.0V battery is working after installing it in my ELT?

Run the ELT self-test; a steady green indicator confirms the 9.0V 17000mAh pack is delivering correct voltage and capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.