Estry
Estry Standard Battery 12V 3000mAh Ni-MH for Lifepak 20
Ni-MH replacement battery delivers 12 V and 3000 mAh for Lifepak 20 defibrillators, certified to ISO 9001, RoHS, CE and UN 38.3 standards
- TypeBatteries
- Battery Pack1-pack
- Battery TypeNi-MH
- Battery Capacity3000mAh
- Battery Voltage12
- Ni-MH chemistry delivers 3000mAh capacity for extended runtime
- 12V output matches original Lifepak 20 specifications precisely
- Built-in protection guards against overcharge over-discharge over-voltage short-circuit
- Certified to ISO9001 RoHS CE UN38.3 MSDS standards
- Compact 216.03 x 46.05 x 23.39mm form factor weighs 668.0g
Replacement for Lifepak 20
The Estry Standard Battery is a 12 V, 3000 mAh nickel-metal-hydride pack built to match the original specifications for the Lifepak 20 and Lifepak 20 tor. It carries ISO9001, CE, RoHS, UN38.3 and MSDS certifications and includes overcharge, over-discharge, over-voltage and short-circuit protection. The single pack weighs 668.0 g and measures 216.03 x 46.05 x 23.39 mm.
Medical teams keeping Lifepak 20 units running
This pack suits technicians who need a direct-replacement cell for routine maintenance or spares stock. It does not suit users who require a different voltage, a lithium chemistry or a higher capacity than 3000 mAh. Buyers with other defibrillator models should verify their part numbers before ordering.
12 V 3000 mAh Ni-MH chemistry
The nominal 12.0 V output and 3000 mAh rating determine whether the pack meets the device’s power-draw and runtime requirements. The 36.0 Wh energy content is the single figure to check against the Lifepak 20 service manual before purchase.
Highlights
- Ni-MH chemistry delivers 3000mAh capacity for extended runtime
- 12V output matches original Lifepak 20 specifications precisely
- Built-in protection guards against overcharge over-discharge over-voltage short-circuit
- Certified to ISO9001 RoHS CE UN38.3 MSDS standards
- Compact 216.03 x 46.05 x 23.39mm form factor weighs 668.0g
Specifications
| Type | Batteries |
|---|---|
| Battery Pack | 1-pack |
| Battery Type | Ni-MH |
| Battery Capacity | 3000mAh |
| Battery Voltage | 12 |
Questions about this item
Does the 12.0 V 3000 mAh Ni-MH pack generate noticeable heat during extended use in a Lifepak 20?
Ni-MH chemistry at 36.0 Wh runs cool under normal discharge; no active cooling is required and the 668.0 g pack stays near ambient temperature during typical shifts.
What existing equipment is needed to charge and install this 12 V 3000 mAh replacement?
A charger approved for 12.0 V Ni-MH packs and access to the Lifepak 20 battery compartment are the only prerequisites; the pack drops in without extra cables or adapters.
Will this 12.0 V 3000 mAh unit work alongside the original charging circuitry in an older Lifepak 20?
Yes — the pack matches the original 12 V 36.0 Wh specification and includes over-charge, over-discharge, over-voltage and short-circuit protection, so the legacy charger manages it safely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



