We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium battery pack, grey plastic casing, two wire leads, 55.96 by 34.12 by 21.4 mm

Estry

Estry Replacement Battery 1800mAh 7.4V for Eitan Medical Infusion Pump 05020-160-0001-BAT LIN337-001

SKU CH-90BP-4M365

Lithium replacement battery delivers 7.4V and 1800mAh for compatible Eitan Medical infusion pumps

  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLithium
  • Battery Capacity1800mAh
  • Battery Voltage7.4
  • Direct replacement for Eitan Medical infusion pump part 05020-160-0001-BAT
  • 1800 mAh lithium pack delivers 13.32 Wh at 7.4 V for extended run time
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection for safer operation
  • Certified to ISO 9001, RoHS, CE, UN 38.3 and MSDS standards
  • Compact 55.96 x 34.12 x 21.4 mm design weighs only 102.2 g

Direct Replacement for Eitan Medical Infusion Pump

This Estry lithium battery pack matches the original 05020-160-0001-BAT and LIN337-001 part numbers. It delivers 7.4V and 1800mAh capacity in a single-cell configuration. The unit is built to the same specifications as the factory battery for compatible infusion pump models. Certified to ISO9001, CE, RoHS, UN38.3 and MSDS standards.

Voltage and Capacity Define Runtime Limits

The 7.4V output and 1800mAh rating set the total energy available at 13.32Wh. Protection circuits guard against overcharge, over-discharge, over-voltage and short circuits. These safeguards limit the maximum current draw and prevent operation outside safe thresholds. The pack must be charged with a charger designed for 7.4V lithium chemistry.

1800mAh Capacity Determines Suitability

The 1800mAh figure is the primary specification that decides whether this pack meets the infusion pump's runtime requirements. Verify the original battery part number 05020-160-0001-BAT or LIN337-001 before purchase. Pumps needing higher capacity or a different voltage will not operate correctly with this unit. Dimensions are 55.96 x 34.12 x 21.4mm and weight is 102.2g.

Highlights

  • Direct replacement for Eitan Medical infusion pump part 05020-160-0001-BAT
  • 1800 mAh lithium pack delivers 13.32 Wh at 7.4 V for extended run time
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection for safer operation
  • Certified to ISO 9001, RoHS, CE, UN 38.3 and MSDS standards
  • Compact 55.96 x 34.12 x 21.4 mm design weighs only 102.2 g

Specifications

BrandEitan Medical
TypeBatteries
Battery Pack1-pack
Battery TypeLithium
Battery Capacity1800mAh
Battery Voltage7.4

Questions about this item

Should I choose the 1800mAh 7.4V version or a different capacity for my Eitan Medical infusion pump?

This replacement matches the original 05020-160-0001-BAT and LIN337-001 part numbers at 1800mAh and 7.4V; select it when your pump requires those exact ratings.

What does the 1800mAh rating mean for actual run time in the pump?

At 7.4V the pack stores 13.32Wh; typical infusion pumps draw low current so expect several hours of continuous operation per full charge.

Does the battery use a standard connector or a proprietary interface for the Eitan Medical pump?

It is built to the exact specifications of the original 05020-160-0001-BAT and LIN337-001 packs, so the connector and pin-out match the pump's proprietary interface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.