We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular Ni-MH battery pack, dark wrap, labelled 7.2V 2000mAh 14.4Wh

Estry

Estry RC400 standard battery 7.2V 2000mAh 14.4Wh

SKU CH-5MP5-R56HK MPN RC400

Ni-MH replacement battery delivers 7.2V and 2000mAh for RC400, 960, 590, 592 and 790 series remote controls

  • Specifications7.2
  • Battery Pack1 Year
  • Drop-in replacement for Scanreco RC400 and Effer RC590 RC960
  • 2 V 2000 mAh Ni-MH pack delivers 14.4 Wh runtime
  • Built-in overcharge over-discharge over-voltage and short-circuit protection
  • Certified to ISO 9001 RoHS CE UN 38.3 and MSDS
  • Compact 150.45 x 50.12 x 28.5 mm housing weighs 394.2 g

Replacement battery for industrial remotes

This 7.2V Ni-MH pack delivers 2000mAh and 14.4Wh, matching the original specifications for Scanreco RC400, Effer RC590, RC960, Cifa 592, HMF Palfinger 592 and Fassi 790 transmitters. It measures 150.45 x 50.12 x 28.5mm and weighs 394.2g. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits.

Suits operators needing a direct drop-in spare

Technicians maintaining the listed crane and loader remotes can swap this pack without modification. Buyers whose equipment uses a different voltage, connector layout or part number not shown above should look elsewhere. The pack is not intended for consumer electronics or generic RC hobby use.

Voltage and capacity must match the original

The 7.2V 2000mAh rating is the single figure that decides fitment; confirm your remote requires exactly these values before ordering. Certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards. Compatible part numbers include 16131, 17162, 13445 and RSC7220.

Highlights

  • Drop-in replacement for Scanreco RC400 and Effer RC590 RC960
  • 2 V 2000 mAh Ni-MH pack delivers 14.4 Wh runtime
  • Built-in overcharge over-discharge over-voltage and short-circuit protection
  • Certified to ISO 9001 RoHS CE UN 38.3 and MSDS
  • Compact 150.45 x 50.12 x 28.5 mm housing weighs 394.2 g

Specifications

BrandNi-MH
Model2000mAh
Specifications7.2
Battery Pack1 Year

Questions about this item

What voltage does the 7.2 V Ni-MH pack deliver to the RC400 controller?

The pack supplies a nominal 7.2 V, matching the original specification for the RC400, RC590, RC960 and compatible Fassi, Palfinger and HMF remotes.

Will the 150.45 x 50.12 x 28.5 mm case fit the battery compartment of a Palfinger 592 remote?

Yes, the dimensions are identical to the OEM 16131 and 17162 packs used in Palfinger 592, HMF 592 and Cifa 592 units.

How do I install the replacement pack without triggering the short-circuit protection?

Disconnect the remote, match the red and black leads to the corresponding terminals, then secure the pack — reversing polarity will activate the protection circuit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.