We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular Ni-MH battery pack, blue shrink wrap with white label, 56.5 by 30.2 by 19.4 mm

Estry

Estry JENE-PC-6000 standard battery 12.0V 300mAh 3.6Wh

SKU CH-G4NT-X6KFC MPN JENE-PC-6000

Ni-MH 12.0 V 300 mAh 3.6 Wh replacement battery for JENE-PC-6000, CP-600, ASIC600, WEB-201, Vykon JACE-600E, CASE6 and JENE-PC3000 controllers

  • Specifications12
  • Battery Pack1 Year
  • Exact-fit replacement for JENE-PC-6000 and CP-600 controllers
  • 0V 300mAh Ni-MH pack delivers 3.6Wh rated capacity
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection
  • Compact 56.5 x 30.2 x 19.4 mm form factor weighs 91.0 g
  • Certified to ISO9001, RoHS, CE and UN38.3 standards

Direct replacement battery

The Estry JENE-PC-6000 is a nickel-metal hydride cell rated at 12.0V and 300mAh, delivering 3.6Wh. It matches the original specifications for controllers such as the CP-600, ASIC600, WEB-201, Vykon JACE-600E, CASE6 and JENE-PC3000.

Simple two-wire swap

Installation requires only disconnecting the old pack and connecting the new one to the same terminals; no soldering or firmware changes are involved. The main risk is reversing polarity, which the built-in protection circuit guards against.

Voltage and capacity match

The single deciding figure is the 12.0V 300mAh rating; if the original controller specifies a different voltage or capacity this pack will not work. Confirm the CP-201, WEB-201, ASIC600 or NPB-BATT part number before ordering.

Highlights

  • Exact-fit replacement for JENE-PC-6000 and CP-600 controllers
  • 0V 300mAh Ni-MH pack delivers 3.6Wh rated capacity
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection
  • Compact 56.5 x 30.2 x 19.4 mm form factor weighs 91.0 g
  • Certified to ISO9001, RoHS, CE and UN38.3 standards

Specifications

BrandNi-MH
Model300mAh
Specifications12
Battery Pack1 Year

Questions about this item

How can I verify the 12.0V 300mAh replacement battery is working after installing it in my CP-600 controller?

Power on the controller and confirm it boots and holds its configuration without the mains supply; the pack delivers 12.0V and 300mAh to maintain the real-time clock and memory.

What comes in the box and do I need to buy any cables or connectors separately for the JENE-PC-6000 battery?

The package contains the 12.0V 300mAh Ni-MH pack measuring 56.5 x 30.2 x 19.4mm and weighing 91.0g; no extra cables or connectors are required.

Which battery part number should I choose — CP-201, WEB-201, ASIC600 or NPB-BATT — for my Vykon JACE-600E controller?

All four part numbers refer to the same 12.0V 300mAh 3.6Wh pack; select the one printed on your existing battery label.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.