We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular Ni-MH battery pack with wire connector, 72.6 by 52.5 by 29.2 millimetres

Estry

Estry DT-735 12.0V 2400mAh standard battery

SKU CH-4WFD-36VKH MPN DT-735

12.0V 2400mAh Ni-MH replacement battery for DT-735 stroboscope, 28.8Wh capacity

  • Specifications12
  • Battery Pack1 Year
  • Exact-fit replacement for Shimpo DT-735 stroboscope
  • 0 V 2400 mAh Ni-MH delivers 28.8 Wh runtime
  • Overcharge over-discharge over-voltage and short-circuit protection built in
  • Certified to ISO 9001 RoHS CE UN 38.3 and MSDS standards
  • Compact 72.6 x 52.5 x 29.2 mm pack weighs 368.0 g

Ni-MH 12.0 V 2400 mAh replacement cell

This Ni-MH pack delivers 12.0 V and 2400 mAh for the DT-735 stroboscope. It matches the original BAT-735 dimensions of 72.6 x 52.5 x 29.2 mm and weighs 368.0 g. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuit. Certified to ISO 9001, RoHS, CE, UN 38.3 and MSDS standards.

Suitable users and exclusions

Technicians who need a direct-fit replacement for the DT-735 stroboscope will find this pack compatible. Buyers whose device requires a different voltage, capacity or form factor should look elsewhere. Units that use the BAT-735 part number but have altered connector geometry are not supported.

Deciding specification

The 12.0 V 2400 mAh Ni-MH chemistry determines whether this cell powers your stroboscope correctly; verify that your unit specifies exactly this voltage and capacity before ordering.

Highlights

  • Exact-fit replacement for Shimpo DT-735 stroboscope
  • 0 V 2400 mAh Ni-MH delivers 28.8 Wh runtime
  • Overcharge over-discharge over-voltage and short-circuit protection built in
  • Certified to ISO 9001 RoHS CE UN 38.3 and MSDS standards
  • Compact 72.6 x 52.5 x 29.2 mm pack weighs 368.0 g

Specifications

BrandNi-MH
Model2400mAh
Specifications12
Battery Pack1 Year

Questions about this item

Must the DT-735 stroboscope be powered off before I swap in this 12.0V 2400mAh pack?

Yes — remove the old BAT-735 only while the stroboscope is switched off, then insert the replacement pack observing the polarity markings.

Will the original charger that came with my DT-735 stroboscope charge this Ni-MH 28.8Wh battery?

The pack matches the original 12.0V 2400mAh specification, so the factory charger will charge it normally.

How can I confirm the replacement battery is delivering the rated 12.0V after installation?

Power on the DT-735 stroboscope; if it starts and runs through its flash sequence without a low-battery warning, the pack is supplying the correct voltage.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.