We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular Ni-MH battery pack, dark casing, 150.0 by 56.0 by 22.0 mm

Estry

Estry 743 7.2V 2200mAh standard battery

SKU CH-KWKD-VH7VH MPN 743

7.2 V, 2200 mAh Ni-MH replacement pack for Fluke 743, 743B, 741, 867B, DSP100, DSP2000, 865, 741B, 863 and 867 instruments

  • Specifications7.2
  • Battery Pack1 Year
  • Direct replacement for Fluke 743, 743B, 741, 867B, DSP100, DSP2000, 865, 741B, 863, 867
  • 2 V, 2200 mAh Ni-MH chemistry delivers 15.84 Wh runtime
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection
  • Certified to ISO 9001, RoHS, CE, UN 38.3 and MSDS standards
  • Compact 150.0 × 56.0 × 22.0 mm pack weighing 284.4 g

Replacement Battery for Fluke Test Tools

This 7.2V 2200mAh Ni-MH pack replaces the Fluke BP7217 cell used in models 743, 743B, 741, 867B, DSP100, DSP2000, 865, 741B, 863 and 867. It is built for technicians who need a direct replacement for ageing original batteries in handheld calibrators and multimeters. The pack delivers 15.84Wh and carries ISO9001, RoHS, CE, UN38.3 and MSDS certification. Buyers with instruments not listed above should look elsewhere.

Voltage and Connector Match

The single specification that decides fit is the 7.2V output combined with the physical connector keyed to the BP7217 part number. If the host device expects a different voltage or a different pin layout, the pack will not power the instrument. Confirm the model number printed on the original battery before ordering.

Simple Swap with Polarisation Check

Installation consists of opening the battery compartment, unplugging the old pack and pressing the new connector into place; the keyed plug prevents reverse insertion. The most common issue is forgetting to verify the model list, leading to a pack that physically fits but does not communicate with the meter's fuel gauge.

Highlights

  • Direct replacement for Fluke 743, 743B, 741, 867B, DSP100, DSP2000, 865, 741B, 863, 867
  • 2 V, 2200 mAh Ni-MH chemistry delivers 15.84 Wh runtime
  • Built-in overcharge, over-discharge, over-voltage and short-circuit protection
  • Certified to ISO 9001, RoHS, CE, UN 38.3 and MSDS standards
  • Compact 150.0 × 56.0 × 22.0 mm pack weighing 284.4 g

Specifications

BrandNi-MH
Model2200mAh
Specifications7.2
Battery Pack1 Year

Questions about this item

How long will the 2200mAh capacity run my Fluke 743 before needing a recharge?

The 2200mAh rating at 7.2V delivers 15.84Wh; actual run-time depends on the instrument's current draw, so divide 2200mAh by your meter's average milliamps to estimate hours.

Does the BP7217 pack use a proprietary connector or a standard interface?

It is a direct replacement for the Fluke BP7217 and fits the listed models including 743, 743B, 741, 867B, DSP100, DSP2000, 865, 741B, 863 and 867.

Will the 150.0 x 56.0 x 22.0mm dimensions fit the battery compartment of my Fluke 867B?

Yes, the pack measures 150.0 x 56.0 x 22.0mm and weighs 284.4g, matching the original BP7217 form factor for the compatible Fluke models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.