We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 7.2V Ni-MH battery pack, matte dark casing, label visible

Estry

Estry 7.2V 2500mAh Ni-MH Replacement Battery for Fluke Ti Series

SKU CH-SNGJ-KBN40

Ni-MH rechargeable battery delivers 7.2 V and 2500 mAh for Fluke Ti-series thermal imagers

  • TypeRechargeable Batteries
  • Battery TypeNi-MH
  • Battery Capacity2500mAh
  • Battery Voltage7.2
  • Exact-spec replacement keeps Fluke Ti imagers running
  • 2500 mAh Ni-MH chemistry delivers 18.0 Wh capacity
  • 2 V output matches original voltage requirement
  • Multi-protection circuit guards against overcharge and short circuit
  • ISO 9001, RoHS, CE, UN 38.3 and MSDS certified

Replacement Battery for Fluke Ti Series

This 7.2V 2500mAh Ni-MH battery replaces the original power source for Fluke Ti10, Ti20, TiR1, Ti25, TiR, Ti9, Ti-25, Ti-10, Ti-20 and Ti20-RBP thermal imagers. It delivers 18.0Wh of capacity and matches the original specifications for fit and function. The pack includes overcharge, over-discharge, over-voltage and short-circuit protection for safe operation. It is certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards.

Compatibility Check Before Ordering

Verify that your thermal imager model appears in the supported list: Ti10, Ti20, TiR1, Ti25, TiR, Ti9, Ti-25, Ti-10, Ti-20 or Ti20-RBP. Confirm the original battery voltage is 7.2V and the chemistry is Ni-MH. Ensure the battery compartment can accept a pack measuring 100.0 x 27.0 x 29.0mm and weighing 242.0g. Cross-reference the original part numbers 3105035 or 3524222 if they are printed on your existing cell.

Suits Fluke Ti Owners Needing a Direct Swap

This unit suits technicians who need a like-for-like replacement for a depleted Fluke Ti-series battery without modifying the device. Buyers whose imagers use a different voltage, chemistry or form factor should look elsewhere. Users requiring a higher capacity than 2500mAh or a different connector layout will not be served by this pack.

Highlights

  • Exact-spec replacement keeps Fluke Ti imagers running
  • 2500 mAh Ni-MH chemistry delivers 18.0 Wh capacity
  • 2 V output matches original voltage requirement
  • Multi-protection circuit guards against overcharge and short circuit
  • ISO 9001, RoHS, CE, UN 38.3 and MSDS certified

Specifications

BrandFluke
TypeRechargeable Batteries
Battery TypeNi-MH
Battery Capacity2500mAh
Battery Voltage7.2

Questions about this item

Does the package include a charger or only the 7.2V 2500mAh battery?

The package contains the replacement Ni-MH battery only. A compatible charger must be purchased separately.

Are there different capacity options available for the Fluke Ti series replacement?

This model is offered in a single 2500mAh / 18.0Wh configuration with 7.2V output.

What runtime can I expect from the 18.0Wh rating when the battery is fitted to a Fluke Ti20?

The 18.0Wh capacity delivers the same energy as the original 3105035 pack, restoring factory runtime for supported Ti series imagers.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.