We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Estry

Estry 6.0V 2500mAh Ni-MH battery for Simon XTi 600-XTI-BAT

SKU CH-7677-FVP6W

Ni-MH replacement battery delivers 6.0 V and 2500 mAh for Simon XTi panels, matching original 600-XTI-BAT specs with ISO9001, RoHS, CE and UN38.3 certification

  • Specifications6
  • Battery Pack1 Year
  • Exact-fit replacement for Simon XTi panels
  • 0 V 2500 mAh Ni-MH delivers 15.0 Wh runtime
  • Built-in overcharge, over-discharge and short-circuit protection
  • Compact 84.28 x 51.92 x 16.88 mm form factor
  • Certified to ISO 9001, RoHS, CE and UN 38.3 standards

Compatible Replacement Battery

The Estry 6.0V 2500mAh Ni-MH pack replaces the 600-XTI-BAT in Interlogix Simon XTi wireless control panels. It matches the original electrical and physical specifications for direct substitution in security installations.

Practical Capacity and Runtime Limits

The 15.0Wh energy rating defines the backup duration available during mains power loss. Runtime scales with panel load, so systems with many active sensors or communicators will deplete the reserve faster than minimal configurations.

Straightforward Swap with Polarity Care

The pack fits the panel's battery compartment using the existing connector. The main installation risk is reversing the polarity or failing to seat the connector fully, which prevents charging and leaves the system unprotected.

Highlights

  • Exact-fit replacement for Simon XTi panels
  • 0 V 2500 mAh Ni-MH delivers 15.0 Wh runtime
  • Built-in overcharge, over-discharge and short-circuit protection
  • Compact 84.28 x 51.92 x 16.88 mm form factor
  • Certified to ISO 9001, RoHS, CE and UN 38.3 standards

Specifications

BrandNi-MH
Model2500mAh
Specifications6
Battery Pack1 Year

Questions about this item

Which capacity should I pick for the Simon XTi panel?

The replacement is offered as a single 2500mAh pack rated at 6.0V and 15.0Wh, matching the original 600-XTI-BAT specification.

How long will the 2500mAh rating actually run the control panel?

At 6.0V the pack stores 15.0Wh; typical standby draw on a Simon XTi is low, so the battery can sustain backup for many hours during mains loss.

Does the connector follow a standard battery interface?

The pack uses the proprietary two-wire plug that fits the Simon XTi control panel directly; no universal standard applies.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.