We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 9.6V 2000mAh Ni-MH battery pack, green label, two wire leads

Estry

Estry 310 9.6V 2000mAh standard battery

SKU CH-V6FK-PT4HG MPN 310

A 9.6 V, 2000 mAh Ni-MH replacement pack for Acroprint 310, ES1000, ATT310 and related time-clock models

  • Specifications9.6
  • Battery Pack1 Year
  • 6 V 2000 mAh Ni-MH chemistry powers compatible Acroprint time clocks reliably
  • 2 Wh capacity supports extended operation between charges for 310, ES1000, ATT310 and other listed models
  • Overcharge, over-discharge, over-voltage and short-circuit protection preserves cell life and safe use
  • ISO 9001, RoHS, CE, UN 38.3 and MSDS certifications confirm quality and environmental compliance
  • Compact 57.06 x 50.0 x 28.6 mm pack weighs 289.0 g for direct drop-in replacement

Direct replacement for Acroprint time clocks

The Estry 310 9.6V 2000mAh Ni-MH pack fits models 310, ES1000, ATT310, 175 Full Power Reserve, ES900 and 420. It matches the original 580108000 part number and supplies 19.2Wh of energy. Dimensions are 57.06 x 50.0 x 28.6mm and weight is 289.0g.

Upgrade from depleted original cells

When the factory pack no longer holds a full shift charge, this 2000mAh unit restores the rated run time without modification. The jump is worth it if the device shows reduced backup or fails to power on after extended idle periods.

Ni-MH chemistry and 9.6V nominal limit

The pack delivers a fixed 9.6V output and cannot be charged by lithium or lead-acid chargers. Overcharge, over-discharge, over-voltage and short-circuit protection are built in. It is certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards.

Highlights

  • 6 V 2000 mAh Ni-MH chemistry powers compatible Acroprint time clocks reliably
  • 2 Wh capacity supports extended operation between charges for 310, ES1000, ATT310 and other listed models
  • Overcharge, over-discharge, over-voltage and short-circuit protection preserves cell life and safe use
  • ISO 9001, RoHS, CE, UN 38.3 and MSDS certifications confirm quality and environmental compliance
  • Compact 57.06 x 50.0 x 28.6 mm pack weighs 289.0 g for direct drop-in replacement

Specifications

BrandNi-MH
Model2000mAh
Specifications9.6
Battery Pack1 Year

Questions about this item

What are the exact dimensions of the 57.06 x 50.0 x 28.6mm battery pack?

The pack measures 57.06mm long, 50.0mm wide and 28.6mm thick, weighing 289.0g.

How is the 9.6V 2000mAh Ni-MH pack installed in the ES1000 or ATT310 time recorder?

Open the battery compartment, disconnect the old pack, connect the new plug matching the original 580108000 wiring, then secure the cover.

When should the 19.2Wh Ni-MH pack be replaced under normal use?

Expect roughly one year of service; replace when the clock loses time or the full power reserve fails to hold.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.